Siemens XMS-S, XMS-D, and XMS-M - XMS-Series manual pull stations, Data Sheet

and Detection Devices Devices Manual Pull Stations XMS S XMS D XMS M Architect Engineer Specifications Product Overview Built in loop isolation Meets Class X Style 7 requirements Supports up to 190 X Series peripherals per loop 30 addressable devices current draw Polarity insensitive in non isolation via SureWire technology Model OH921 Multi color status LED Fire Detector T 45 reset key Reduced mounting with maintenance Trouble indication during service Single action double action and versions available Portuguese and Spanish versions RoHS compliant UL38 Listed XMS Series of manual pull stations are a complete addressable and conventional station portfolio that include single action double action and metal versions addressable versions feature built in Class X Style 7 isolation capability for system survivability All models feature a T 45 reset key to match the fire panel enclosure Addressable models also feature a tri color status LED to normal alarm and trouble status All modules utilize one address manual stations can be commissioned non isolation polarity insensitive or modes of operation XMS S XMS D and XMS M are compatible with Siemens FACPs The Model is a single action pull station in a plastic housing that requires one action by the to initiate the alarm The Model XMS D is a double action pull station in a plastic that requires two actions by the user to initiate an alarm The Model XMS M is single action pull station in a metal housing that requires one action by the user to the alarm These models are field installed addressable devices containing control panel communication technology The XMS Series manual pull stations a trouble that places the fire alarm panel a trouble condition if an XMS is accidentally left in armed status when the cover is removed for work technology provides two direction communication the control panel To reset the stations insert the T45 key provided into the key lock and turn the 10 15 degrees counter clockwise as the arrow The cover will move upward to the normal Rotate the key clockwise and remove key from lock At Normal position the top of the Cover is flush the top surface of the Base Reset the Fire Alarm Panel to clear the alarm XMS D XMS S XMS D and XMS M manual stations operate with the Desigo Fire Safety Cerberus PRO Modular via the XDLC These devices can be wired in either Mode or Polarity Insensitive Mode Wiring The XMS S XMS M manual station cover has a recess pocket to pull down and locks in position after the alarm is The XMS D manual station has an additional lever labeled HERE to get access to the front cover pocket to initiate the alarm Infrastructure Building Products 6364 usa siemens com fire Diagram Data Range Average Operating 24v Range Range 32VDC 120 49 95 RH Properties impact plastic weight lbs H x 4.0 W x 1.250 D deep 1 gang box boxes for Ordering Number Single Action Manual Pull with Isolation Double Action Manual Pull with Isolation Single Action Metal Pull with Isolation Single Action Manual Pull with Isolation Portugese Text Double Action Manual Pull with Isolation Portugese Text Single Action Manual Pull with Isolation Spanish Text Double Action Manual Pull with Isolation Spanish Text Double Action Manual Pull for Agent Release Double Action Manual Pull Single Action Manual Station Auxiliary Relay and Key Switch Mounting Backbox for X Series Stations Plate for X Series Manual Stations Legacy Surface Backboxes Plate for X Series Manual Stations 4 and Double Gang Backboxes Infrastructure Building Products usa siemens com fire NOTICE The information contained in this data sheet document is intended only a summary and is subject to change without notice product s described here has have a specific instruction sheet s cover various technical limitation and liability information of install type instruction sheets as well as the General Product and Limitations document which also contains important data provided with the product and are available from the Manufacturer contained in the aforesaid type of documentation should be consulted a fire safety professional before specifying or using the product further questions or assistance concerning problems that might arise relative to the functioning of the equipment please contact Manufacturer Industry Inc Infrastructure Building Products Fernwood Road Florham Park NJ 07932 973 593 2600 December 2019 Issue