Silent Knight 5208Opcard

SK 5208 Basic Operating Instructions P N 151214 Rev A instructions must be framed and displayed next to the panel in accordance with NFPA fire code for Local Fire Alarm System Message This 7HVW RGH ODUP RGH RGH Code system will perform a display lamp test and a test Code system Code the dialer and aborts the call to central station YHQWV RGH Code the panel history which includes alarms troubles reports time and date changes etc 6WDWXV RGH Code existing system status List Alarms first and then troubles To the system Alarms the Dialer History Status Troubles or RGH Code a Zone Zone NAC RQH RGH NAC 1 RGH Code the process to enable the zone the process to enable the NAC RGH 6PN 3ZU RGH 7HVW RGH Code Code Code Installer End the Fire Drill press then code Code all smoke detector power End the Walk Test press exit press or wait 15 seconds or can be acknowledged by pressing the Supervisory and Trouble will flash when an un acknowledged alarm supervisory or trouble condition exists each event has been acknowledged its associated LED Alarm Supervisory or Trouble LED stop flashing and turn on When viewing system status the LCD displays for each individual event once it has been acknowledged The panel piezo will silence after all alarms have been acknowledged The control panel piezo will continue to sound for Supervisories and Troubles even after the event has been button No code is required to acknowledge events The status LEDs Supervisories and troubles will silence once the event is restored the event is acknowledged an event is added to the event history buffer Acknowledged events in the history buffer will be with an asterisk Meaning red yellow yellow yellow green Service Contact condition in alarm will flash when a alarm condition exists that has not been acknowledged condition a supervisory condition exist on the system will flash when a supervisory condition exists that has not been acknowledged condition condition exists will flash when a trouble condition exists that has not been acknowledged condition or trouble condition has been silenced but condition still exists is running on AC normal condition standby battery fully charged has lost all power is running on battery power only or AC power only a Fire Drill Detectors Test the System Events of Options scroll trough list or