Silent Knight 5217 10-Zone Expander for 5208 Manual

Zone Expander Instructions following instructions are a quick reference refer to the control panel installation for detailed system information Model SK 5217 provides the SK 5208 with additional class B style A zones The SK connects to the SK 5208 control panel via SBUS as shown in Figure 1 circuit Resistance 50 ohms Total alarm current all class B style A zones 1 A Standby Current per Zone 3.0 mA Alarm Current per Zone 95 mA Voltage 17.5 VDC Current 60 Ma Compatibility ID 24J a list of compatible detectors refer to the installation manual PN 151240 ID Dip Switches Panel Limited Limited 1 SBUS Connections Inputs Listed Resistor 2 shows how to wire the SK 5217 Use a end of line resistor for each class B circuit EOL must be wired in parallel with the open contact farthest from the panel 7628 2 Model SK 5217 Class B Circuits 151236 Zone Expander Installation Instructions Instructions SK 5217 into a metal bracket and standoffs the SK 5208 cabinet or into SK 2190 cabinet the SK 5217 into Cabinet these steps to properly mount the SK zone expander into the SK 5208 cabinet Remove power from the control panel Mount the SK 5217 onto the standoffs and located in the cabinet See Figure 3 3 Installing the 5217 Into the 5208 Cabinet Connect the SK 5217 to the SK 5208 control as shown in Figure 1 Wire the zone inputs to the zone expander as in Figure 2 Reconnect power to the control panel the SK 5217 into the Accessory Cabinet these steps to properly mount the SK zone expander into the SK 2190 cabinet Mount the remote cabinet using the cabinet holes See Figure 4 Remove power from the control panel Mount the SK 5217 onto the standoffs and located in the cabinet See Figure 4 4 Model SK 5217 Remote Installation Connect the SK 5217 to the SK 5208 control as shown in Figure 1 Wire the zone inputs to the zone expander as in Figure 2 Meridian Circle Grove MN 55369 4927 or 800 328 0103 763 493 6475 2006 Silent Knight PN 151236 Rev B