Silent Knight 5635 Remote Annunciator

REMOTE ANNUNCIATOR 5635 Annunciator Remote LCD Annunciator 5600 Fire Alarm Control Panel 5635 is a compact backlit 80 character LCD remote annunciator It provides system status indicators for Power Alarm Trouble Supervisory and Alarm Silenced conditions Up to two 5635 can be connected to 5600 via the SBUS more information about the 5635 or to locate your nearest source please call 800 328 0103 5635 displays English language text of system point including device type zone independent alarm trouble or supervisory status as well as any banners programmed into the control panel It control switches for remote control of critical functions A keyswitch prevents unauthorized of the control switches 5635 can be surface or flush mounted Surface directly to wall or to single double or 4 square box Semi flush mount to single double or 4 electrical box Use ANN SB80KIT for angled view Listed to UL Standard 864 9th Edition Backlit 80 character LCD display 20 characters x 4 Control switches for System Acknowledge Signal Drill and Reset Keyswitch enables disables control switches and locks annunciator enclosure System status LEDs for AC Power Alarm Trouble and Alarm Silence 5635 connects to the SBUS terminal on the 5600 and minimal panel programming Displays device type identifiers individual point alarm supervisory zone and custom alpha labels Time and date display field Backlight turns off during AC loss to conserve battery but will turn back on if an alarm condition May be powered by 24 VDC from the host FACP or by power supply requires 24 VDC Available in red 5635R or white 5635W Annunciator keys beep when they are pressed Up to two 5635 can be connected on the SBUS 5635 and Indicators AC Power Alarm Trouble Supervisory Alarm Silenced 5635 is compatible with the following FACP 5600 Intelligent Fire Panel Firmware revision 2.0 higher listings and approvals below apply to the 5635 some cases certain modules may not be listed certain approval agencies or listing may be in Consult factory for latest listing status UL S2424 FM approved CSFM 7120 0075 211 City of NY COA 6057 ANNUNCIATOR 5635 Annunciator Specifications contractor shall furnish and install where indicated on the plans the Model 5635 Remote Annunciator shall be a 80 character LCD backlit annunciator Module shall be capable of remote programming as as displaying system messages annunciate alarms supervisories and troubles and provide status Module ID shall be programmed with a five position DIP switch The control shall be capable of up to two supervised 5635 The 5635 can be surface or flush mounted Surface mount directly to wall to single double or 4 square electrical box Semi flush mount to single double or 4 square electrical box to two 5635 per system Information 80 character LCD 80 character LCD Red surface mount backbox with White surface mount backbox with wedge wedge FACP W x 5.375 H x 1.375 D W x 13.65 H x 3.49 D cm Red White voltage range 18 VDC to 28 VDC consumption 24 VDC nominal filtered and 40 mA maximum connections are power limited and supervised temperature 32 to 120 0 to 49 humidity 93 2 RH noncondensing at 2 90 3 use indoors in a dry location document is not intended to be used for installation purposes We try to our product information up to date and accurate We cannot cover all applications or anticipate all requirements All specifications are to change without notice For more information contact Silent Knight Clintonville Road Northford CT 06472 1610 Phone 800 328 0103 or 484 7161 Fax 203 484 7118 www silentknight com IN AMERICA 351519 Rev B 2011 Honeywell International Inc