Silent Knight 5815RMK 5815XL Remote Mounting Kit Installation Sheet

SILENT Honeywell Remote Mounting Installation Instructions 5815RMK is a remote mounting kit that lets install up to two 5815XL SLC expanders in single cabinet and wiring of this device must be done in with NFPA 72 and local ordinances 10 3 8 x 10 3 16 x 3 cm W x 25.9 cm H x 7.6 cm D 5815RMK is compatible with Silent Knight SLC expanders is important to protect the 5815RMK and its from water To prevent water damage the mounting requirements listed below Do not mount directly on exterior walls masonry walls condensation Do not mount directly on exterior walls grade condensation from plumbing leaks from splash caused by sprinkler ports Do not mount in areas with humidity gener equipment such as dryers production Mount in an area that always remains within following temperature and humidity 0 32 and 10 at 30 86 noncondensing Mount in an indoor dry location electronic components on the 5815XL and FACP are sensitive to electrostatic discharge a grounding strap when handling any of the mount the 5815RMK cabinet Remove the 5815RMK from its packing Unlock the 5815RMK cabinet and lift up on cabinet door to remove it Unscrewing the two mounting plate screws shown in Figure 1 to remove the mounting 1 Remove the Two Mounting Plate Screws to the Cabinet Mounting Holes 151391 Remote Mounting Kit Installation Instructions Mount the cabinet using the appropriate and anchors See also Figure 2 2 Cabinet Mounting Holes Reinstall the mounting plate in the cabinet the eight standoffs included with the as shown in Figure 3 3 Standoff Installation Meridian Circle Grove MN 55369 4927 or 800 328 0103 763 493 6475 2005 Silent Knight PN 151391 Rev A