Silent Knight 5824 Serial Parallel Module Manual

Serial Parallel Printer Module Installation 5824 Serial Parallel Printer Interface 5824 connects a compatible fire alarm panel FACP directly to a printer to event history You can also print system logs in real time and detector status from FACPs and wiring of this device must be done in with NFPA 72 and local ordinances Voltage 24 VDC Alarm and Standby 50 mA Per FACP Addressable FACPs 8 5208 FACP 1 Temperature 32 to 120 0 to 49 Wiring Distance from FACP 6000 ft 1829 m Surface 6 x 7 3 4 x 1 7 16 15.2 cm W x 19.7 cm H x 3.7 cm D Port Ancillary Port Primary Fire Signaling 5824 is compatible with all Silent Knight FACPs and with the 5208 FACP 5824 comes in a plastic enclosure which be mounted inside the annunciator or cabinet mount the 5824 plastic enclosure into the cabinet Remove the 5824 cover Use a small screw if necessary Remove the 5824 circuit board from the base pushing outward on the base snap tabs and lifting the circuit board 1 5824 Circuit Board And Plastic Base Mount the plastic base into the appropriate cabinet Replace the circuit board in the plastic base may be necessary to connect the wiring to the circuit before the board is replaced into the base 151392 Rev G2 12 207 Serial Parallel Printer Interface Module Installation Instructions to a FACP Table 1 and Figure 2 to terminate the wiring 1 5824 to FACP Connections SBUS Terminals Terminals 2 Wiring the 5824 to the FACP DIP Switches 5824 connected to a compatible FACP an ID number which is set using the switches on the 5824 circuit board Refer to 3 to see how to position the DIP switches the desired ID number See the FACP manual for specific information on ID assignments 3 5824 DIP Switch Settings Used to Set the ID to a Printer need to provide either a pass through 9 pin cable or a 25 pin to Centronics parallel to connect the 5824 to the printer Using appropriate printer cable connect the cable the serial or parallel port on the 5824 and then it to the printer More Information document is for quick reference For more refer to the FACP installation 151392 Rev G2