Silent Knight 5860 5860R Remote Annunciator Manual

5860 Remote Fire Annunciator Quick Reference Connections the 5860 to the FACP as Shown in Figure 3 optional Model 5860 Remote Annunciator as shown Figure 1 can be surface or flush mounted 3 SBUS Connections 5860s more see PN 1 Model 5860 Remote Annunciator installation involves the following steps Make sure power is off at the panel Annunciator is assembled at the factory Disassemble needed Mount annunciator Wire annunciator to the panel See Use the DIP switches on the back of the 5860 to set annunciator ID See Figure 4 2 5860 Parts 4 DIP Switch settings 151042 Rev C 14 0358 5860 Installation Instructions the 5860 section describes mounting the remote annunciator annunciator can be flush or surface mounted Mounting section of the manual describes flush mounting these steps to flush mount the 5860 5 Annunciator Dimensions Mounting Model 5860TG gray and 5860TR red trim ring kits available for use when surface mounting Holes 6 Surface Mounting 7 Flush Mounting 151042 Rev C 14 0358