Silent Knight 6808 Operation Card

Model 6808 Basic Operating Instructions Instructions must be framed and displayed next to the 6808 panel in with NFPA 72 fire code for Local Protected Fire Alarm Systems the system in accordance to NFPA 72 to Perform SILENCE then rotate the key or enter a code if prompted Silence LED will light RESET then rotate the key or enter a code if prompted the up or down arrow button to view Alarms Supervisories and Troubles Alarms and Alarms Alarms and a Point Status a Fire Drill Detector Press to access Main Menu then rotate the key or enter a code if prompted Then press 2 to select Point Functions Select the module the device is located on by using the up or down arrow then press Enter the point number Press ENTER to access Main Menu then rotate the key or enter a code if prompted Press 1 to select System Tests Enter code if prompted then press 1 to select Fire Drill Press ENTER to start the fire drill Press ENTER to end the fire drill Press ENTER to access Main Menu Press 2 for Point Status From the list that displays select the SLC module where the point you want to view is The fourth line of the display shows the sensitivity status means the detector is in compliance with NFPA 72 MAINT means the detector is in compliance with NFPA 72 but maintenance be performed soon TRBLE means the detector is not in compliance with 72 Press ENTER to access Main Menu then rotate the key or enter a code if prompted Then press 4 to select Set Time Date Enter a code if prompted Make changes in the Time and Date on the screen as necessary Press ENTER if you wish to keep the changes Press ENTER to set the entered time date Rotate the key or enter a code to access to access Main Menu Press 2 to select Point Functions Press 1 for Disable Enable Pt Press 7 for Disable Enable Pt Use the up or down arrow or to move through the list Then press ENTER to select the where the point you want to disable enable is located Enter the point or circuit number that you want to disable enable Press Right Arrow to toggle between NORMAL enable or DISABLE Press ENTER to access Main Menu then rotate the key or enter a code if prompted Press 3 to select Event History Press the up or down arrow to view events in the history buffer Disable a Point Event History Service Call P N LS10164 001SK E Rev A ECN 16 0218