Silent Knight IFP2000OpCard

Model IFP 2000 Basic Operating Instructions Instructions must be framed and displayed next to the IFP 2000 panel in with NFPA 72 fire code for Local Protected Fire Alarm Systems the system in accordance to NFPA 72 to Perform an A will appear in the annunciator display as shown Below then rotate the key or enter a code if prompted Silence LED will light then rotate the key or enter a code if prompted then rotate the key or enter a code if prompted When the Alarm or Trouble is Alarms and Troubles Alarms Alarms and Alarms Supervisories Troubles Standby each type of condition press the LED on Knight IFP 2000 All Systems Normal the button enter a code if prompted or button associated for Alarms Supervisories or to access Main Menu Press Then press Enter code if prompted then press Press Press to start the fire drill to end the fire drill to select System Tests to select Fire Drill to access Main Menu then rotate the key or enter a code if prompted to select Point Functions Press Then press Enter code if prompted then press Select the module the device is located on by using the Enter the point number Follow steps 1 through 5 for viewing a point status Press to view detector sensitivity to select Point Status or Then press to select Set Time Date Enter a code if prompted to access Main Menu Press Then press Make changes in the fields on the screen as necessary Press Press if you wish to keep the changes to set the entered time and date to access Main Menu then rotate the key or enter a code if prompted to select Point Functions Press Then press Enter code if prompted then press Select the module the point is located on by using the Enter the point number to select Disable Enable Pt or Then press Press Press Press the to access Main Menu then rotate the key or enter a code if prompted to select Event History or to view events in the history buffer a Fire Drill a Point Status Detector Sensitivity Time and Date Disable a Point Event History Service call 151432 Rev A