Silent Knight SD500-ANM Addressable Notification Module Manual

Instructions following instructions are a quick reference refer to the control panel installation for detailed system information SD500 ANM Addressable Notification is an output accessory module for the Fire Control Panel which provides reverse polarity supervised notification circuit The notification circuit can be in either Class A Style Z or Class B Y Specification 1 list the electrical physical and specifications of the SD500 1 SD500 ANM Specs Parameter Temperature 120 F 49 C VDC A max VDC Wave Rectified mA indoor use only Voltage Appliance Current Outputs Current SLC Loop Resistance Impedance Output When calculating total alarm current add the ratings of all the notification devices on the circuit the SD500 ANM Installation and wiring of this device must be done accordance with NFPA 72 and local ordinances All wiring is supervised and power limited SD500 ANM to the SLC SD500 ANM connection for the SLC loop and external are the same Wire as in Figure 1 1 SD500 ANM Connections to the 5815XL 151109 SD500 ANM Installation Instructions B Notification Configuration Class B notification appliance circuits to SD500 ANM as shown in Figure 2 Power Using Circuits 7628 listed k EOL SD500 ANM can use aux power from any VDC source The following describes how to the Flexput circuits as the auxiliary power Connect the aux power wires to the Flexput using terminals as positive terminals as negative power See 4 2 SD500 ANM Class B Notification Wiring A Notification Configuration Class A notification appliance circuits to SD500 ANM as shown in Figure 3 4 Flexput Auxiliary Power Output Configure the auxiliary power output for output through programming Refer the control panel installation manual for information 3 SD500 ANM Class A Notification Wiring Meridian Circle Grove MN 55369 4927 or 800 328 0103 763 493 6475 2005 Silent Knight PN 151109 Rev C