Silent Knight SD500-PS Addressable Pull Station Data Sheet

INTELLIKNIGHT ACCESSORY and SD500 PSDA Pull Station addressable pull stations fast response with pin point location ID SD500 PS and SD500 PSDA are a single action or dual action addressable manual fire alarm pull station use with Silent Knight s IntelliKnight fire control panel Extremely easy to operate the SD500 PS PSDA a fast and practical means of manually initiating a fire alarm signal The IntelliKnight panel recognizes manual pull station by its specific address saving precious seconds in determining the location of an alarm SD500 PS PSDA mounts to a single gang box and features a rugged metal construction that lasts and lasts all this with the features you ve come to expect from Silent Knight easy installation and stable and it adds up to a flexible solution for all your fire protection needs Pull SD500 PSDA SD500 PS is a single action fire pull station and SD500 PSDA is a dual action fire pull station The feature rugged construction A terminal strip back of the pull station allows of the pull station to SLC of an IntelliKnight control The SD500 PS PSDA is for indoor use in non environments The open initiating point are gold plated to avoid of corrosion The SD500 has been tested by UL compliance to the requirements the Americans with Disabilities ADA UL Listed CSFM listed MEA SD500 PS only Vol XI ADA compliant Key reset Same key as Silent enclosures Surface mount back box Terminals accept up to 14 wire Extremely easy to operate Corrosion resistant gold plated Reflective label makes it easier locate in low light SD500 PS PSDA single action stations are operated by a pull the front pull cover of the A plunger switch wired to self contained addressable is released as the pull opens to initiate the alarm operated the cover hangs and can be seen up to 100 away The pull station is reset returning the front cover to the upright position and the station with a reset The reset keys are the same used on Silent Knight SD500 PS PSDA includes a LED which blinks indicating the addressable module is with the loop The LED lights continuously an alarm A dip switch on addressable module is used to the unique address Voltage Current Current Temperature to 120 0 to 49 Single gang box Optional Red Surface Box 350342 Rev E 2016 Honeywell International Inc ACCESSORY and SD500 PSDA Pull Station Specifications pull station shall be addressable Module SD500 PS SD500 PSDA Equipment shall be made of 14 C R S Cold Rolled Steel painted with a red enamel The label shall contain the words Fire Alarm and made of a reflective material embossed text 3 8 inches tall Operating instruction shall be clearly visible on same label Manual station Shall contain a key operated test and reset lock using a lock plate actuator the shall match the control panel station shall contain four terminal blocks with two connected to the addressable module and two connect the SLC loop Manual station shall provide data to the control panel with an ID address programmed by dip settings stations shall be Underwriters Laboratories Inc listed and installed within the limits defined in the Disabilities Act to Single Electrical Box to Optional Mount Box SD500 LK document is not intended to be used for installation purposes We try to keep our product up to date and accurate We cannot cover all specific applications or anticipate all All specifications are subject to change without notice For more information contact Knight 12 Clintonville Road Northford CT 06472 1610 Phone 800 328 0103 203 484 7118 www silentknight com