Silent Knight SD505-DUCTR & DTS-K Data Sheet

INTELLIKNIGHT ACCESSORY SD505 DUCTR smoke in air handling systems and re circulation with Silent Knight duct smoke detector SD505 DUCTR addressable duct smoke detector detects smoke and products of combustion present in air through an HVAC air handling system The SD505 DUCTR is a heavy duty metal housing with a SD505 APS photoelectric smoke detector and relay module When smoke is detected in a duct the communicates the condition to the IntelliKnight control panel The panel in turn depending on programming wiring turns off fans blowers and other devices there even more power and flexibility available to the IntelliKnight family of products For more information this product or to locate your nearest source please call 800 328 0103 SD505 DUCTR Duct Smoke with Relay Model SD505 DUCTR Duct Smoke Detector Relay provides early detection smoke and products of present in air moving an HVAC duct to prevent of smoke into the air system The SD505 is a heavy duty metal with a pre installed Analog Photo Electric Sensor and relay module smoke is detected in a duct unit communicates the to the IntelliKnight FACP built in relay module in turn off fans blowers and other sampling is accomplished by tubes which protrude into the An exhaust tube of one length 7.5 is provided the detector housing Intake tubes ordered are supplied in three lengths Duct mounting is through a template 4 sheet metal screws Two wire connection to SLC Detects and limits spread of smoke LED alarm indication and on sensor head Rugged steel backbox with clear cover template included No screens or filters to clean SD505 APS Photoelectric Smoke pre installed 3 standard tube lengths UL listed complies with NFPA 72 101 CSFM listed MEA Approved 429 92 E Vol 9 FM Approved 2 H x 9 L x 7 W 3lbs Voltage 24 VDC Relay Contact rating 24 VDC 10A 115 VAC 240 VAC Relay Contact Rating 30 VDC Power Input Current Standby 62 mA Alarm Input Current 0.5 mA SLS resistance 50 Ohms Temp 32 to 100 to 37 non condensing Ratings Velocity 300 4000 ft min Tubes sampling tube sampling tube sampling tube ACCESSORY SD505 DUCTR and SD505 DTS K Smoke Detector with Relay and Remote Test Switch Specifications air duct smoke detector shall be Silent Knight Model SD505 DUCTR and remote test switch shall be The housing shall contain a Silent Knight model SD505 APS Photoelectric Smoke Sensor duct detector shall be of metal construction Complete mechanical installation must be able to be performed removal of the detector cover Terminal connections shall be screw type using a minimum of 6 screw A Style 6 connection document is not intended to be used for installation purposes We try to our product information up to date and accurate We cannot cover all applications or anticipate all requirements All specifications are to change without notice For more information contact Silent Knight Clintonville Road Northford CT 06472 1610 Phone 800 328 0103 203 484 7118 www silentknight com B Style 4 IN AMERICA 350005 Rev B 2011 Honeywell International Inc