Silent Knight SK-F485C Installation Sheet

Fiber to SBUS Installation Instructions SK F485C offers a seamless from panel SBUS connection to and back again Product is not to be used to network FACP Primary power SBUS and SLC circuits are supervised power limited Fiber optic circuits are supervised SK F485C is compatible with the Silent Knight FACPs and power IFP 50 5700 IFP 100 5808 IFP 1000 5820XL IFP 2000 RPS 2000 IFP 2000VIP can mount the SK F485C in a FACP cabinet mount the SK F485C Remove AC power and disconnect the batteries from the main control IFP 100ECS IFP 1000ECS 5895XL RPS 1000 5496 Mount the SK F485C in an FACP or supply using the 1 4 standoff and secure with screws See Figure 1 and Figure 2 When the SK F485C is used with IFP 100 5808 or IFP you must use the 5815RMK cabinet 2 SK F485C Mounting in FACP Cabinet using 5815RMK 5815RMK is a remote mounting kit that you install up to two SK F485C modules in a single cabinet When using a 5815RMK you must mount it within 20 of control panel or power supply in conduit 1 1 4 Standoff and Screw 3 SK F485C mounting using 5815RMK LS10004 001SK E Rev A 12 0089 Fiber to SBUS Converter Installation Instructions Table 1 and Figure 4 to wire a SK to a compatible FACP 1 SK F485C to FACP Connections Terminals SBUS Out Terminals to Power Supply Table 3 and Figure 5 for terminal for SK F485C to the 5895XL or 3 SK F485C to Power Supply Connection Supply Number 4 SK F485C connection to the panel to SK F485C Connection Table 2 for terminal connections for SK to the SK F485C 2 SK F485C to SK F485C Connection 5 SK F485C to power supply terminal PN LS10004 001SK E Rev A to Power Supply Fiber 6 Connecting fiber from panel to power supply Fiber to SBUS Converter Installation Instructions External Power Supply 9 35VDC 125 max Fiber Connection Duplex ST connectors Tx and Rx Data Fiber Cable Duplex micron Multimode Fiber Data Rate bits second Fiber Distance Up to 1.0 Mile 1.6Km Connection two wire or Ter strip and jumper selectable bias There are several jumpers on the board These jumpers to remain in place Maximum attenuation 5.5db SK F485C Cable single twisted pair Helix 21011 SK F485C Data Direction Control Auto half duplex transmitter enable con for any baud rate data bits Operating Temp 32 120 0 49 Humidity 10 93 non condensing Dimensions 4.75 x 4.25 x 1.0 LS10004 001SK E Rev A