Simplex 2098-9203 Cleaning Instructions

Simplex 9203 Photoelectric and Photo w Heat Detectors Instructions Cleaning Use the 553 640 Vacuum Cleaner needed use Solution 2000 All Purpose Cleaner detector cover vacuum exterior perimeter of the detector No 553 636 and the 553 638 Lint Free Cloth to clean Steps 1 and 2 are sufficient an intitial cleaning of the detector Cleaning Figurel Using a screwdriver or similar tool to press down on each tab as shown unlatch the three outer tabs and then pull off the cover Figure 2 Free the LED side of the smoke chamber cover by pushing it unlatches cover in the direction of the arrow Pressurized Air and 553 431 Detector Cleaning Kit clean the inside of the cover photo diode side Turn the detector 180 Then repeat Step 4 to unlatch Using appropriate materials chamber and its cover Use the foam swabs and isopropyl alcohol the 553 641 Pressurized Air Snap the cover LED side Fit the outer cover back onto the detector back onto the smoke chamber Be sure to fully seat all three prongs the 553 431 Kit to remove remaining dust particles after cleaning Using a Model 553 533 Smoke Detector Tester check to see that the detector sensitivity meets specifications Replace detectors fail to meet sensitivity specifications 1 1994 Simplex Time Recorder Co Gardner MA 01441 0001 specifications other were current as of publication are subject change without notice Manuals Online 2 007 Manuals Online