Simplex 2099-9767, -9799 Intrinsically-Safe Fire Alarm Stations Installation Operating Instructions
File Preview
Click below to download for free
Click below to download for free
File Data
Name | simplex-2099-9767-9799-intrinsically-safe-fire-alarm-stations-installation-operating-instructions-0317598264.pdf |
---|---|
Type | |
Size | 858.91 KB |
Downloads |
Text Preview
s Simplex Operating 9799 Alarm Stations ACTION STATION OF SINGLE ACTION TYPE handle causes the handle down firmly to break the rod visible sounding of an alarm front of the station must be unlocked and opened reset the handle before the fire alarm system can be drawing normal Replace as shown OF GLASS DOUBLE ACTION TYPE glass with the hammer and pulling down firmly to break the rod visible below the causes the sounding of an alarm The front of station must be unlocked and opened reset the before the fire alarm system can be returned to Replace the drawing and replace the rod as shown in mounting drawing glass plate as shown authorities and operate station as in an and alarm station After plate on glass double action units and restore the control panel National Fire Protection Association minimum this subject When manual station appears in any way additional units be installed Stations should be mounted with bottom of the station not less than 3 112 ft 1.07M more than 5 feet 1.52M the floor Usually are mounted at the 4 112 ft 1.4M level order make building and usable by the physically some specifications may require the station be installed not more than 3 l 2 1.07M from the floor DOUBLE STATION should be located distributed and readily accessible the normal path of exit the protected area so that they are ON ALL 2099 STATIONS installed unlocking and an alarm front of station VIEW VIEW should be provided on each floor to obtain a distance of not more than 200 feet 60.96M nearest station from any point in the building One should be provided 929 sq or more One station should be provided on the if the floor and on each succeeding alternate to be protected are smaller the limits as above 10,000 square where area each equipment must be installed 12.6 1987 hazardous accordance to Control Drawing 841 848 surface mounting use a 2975 9178 or a 29759022 steel back back box Do not 2 3 16 box with a depth semi flush mounting use a standard 4 10.16cm outlet box with a minimum depth of 2 118 with a 3 4 1.9cm deep single gang 6 16cm from the wall surface NOT RECESS DIRECTION THE GLASS RETAINER GLASS PLATE ON DOUBLE ACTION TYPE Lift hammer Fit glass under tab Fit glass plate retainer notch of Push glass retainer into place Gently lower hammer STATIONS GANG NOT NO 773 CITY NO 52C 14 SIMPLEX 8469 OR 9.52cm SIMPLEX DEPTH OUTLET BOX FURNISHED NO 231 OR 337 NO 451 i ii4 OR 4SD SPL OR 314 DO NOT USE SHALLOW NO 52171 3 4 OR STATIONS 3 4 INCH CONDUIT TOP BOTTOM OF BOX FURNISHED BY SIMPLEX MTG MTG DIM DEEP SINGL GANG BOX NOT FURNISHED RACO NO 500 NO 222 OR STEEL NO CDOW NO 8 3 FORMERI A 3 FURNISHED SIMPLEX no 18 AWG minimum No 14 AWG maximum TERMINAL SPEC SYSTEM SUPERVISION DO NOT USE WIRE UNDER TERMINALS BREAK RUN TO PROVIDE SUPERVISION OF MTG Alarm