Simplex 2500 Network Display Unit (NDU) with Command Center Single & Dual Channel Acknowledging Alarms

Wimplex TO OPERATE MIKE TO OPERATE MICROPHONE To make an announcement with mike AREA IN ALARM Gq to step 2 ALL AREAS Flip up ALL TALK switch SPEClFlC AREAS Flip up all Speaker Select Switches Remove mike from enclosure and press Talk Switch Turns off any active tone or message Wait for Talk LED to go on Make appropriate announcement Releasing Mike Talk Switch restarts or message if alarm exists With NO ALARM when finished flip ALL SPEAKERS TALK switch all activated Speaker Select Then replace the mike TO INITIATE AN EVACUATION TO EVACUATE ALL AREAS Flip up SPEAKERS EVAC switch EVACUATESfEC F CAREAS Flip all desired Speaker Select Switches flip up SELECTIVE EVAC switch To make an announcement over mike HOW TO OPERATE shown When finished flip down ALL EVAC switch TO SILENCE ALARM SIGNALS ALARM SILENCE key silences and lights the SILENCED LED To silence alarm evacuation signals NDU Panel ALARM SILENCE TO USE LOCAL SPEAKER active tone message on panel Flip up LOCAL SPEAKER switch When finished flip down LOCAL switch TO ACKNOWLEDGE ALARMS FOR A 2500 NDU COMMAND CENTER CHANNEL AUDIO SAFETY AND THE SAFETY OF THOSE AROUND YOU ALWAYS COMES FIRST practices Be sure you khow what to do during a fire depend upon NDU WlTH CO SELECTIVE TO OPERATE PHONE OPERATION When remote phone is plugged in or handset is lifted Ring signal is heard on remote hand Phone LED flashes at panel Tone sounds at panel Pick up master phone To connect phone flip up Phone Select next to flashing LED Handset ring signal goes off Flashing LED turns on steady Panel tone is turned off Use master phone as required Repeat steps 3 and 4 if another remote is lifted or phone is plugged silence the tone without connecting remote phone flip up PHONE SILENCE switch When finished hang up master phone flip down Phone Select Switches Remote phone must be unplugged or handset replaced If remote is off hook more than 10 panel tone re sounds and flashes YOUR SYSTEM SWITCH CONFIGU DOES NOT MATCH THIS CONSULT SIMPLEX FOR OPERATIONS SIMPLEX IN THE YELLOW PAGES CASE OF TROUBLE NOTIFY PHoNE 4 1 V J SELECT SELECT SELECT SELECT SWITCH OPERATION SELECT UP DOWN CENTER NO INSTRUCTIONS ARE INTENDED TO BE FRAMED AND MOUNTED ADJACENT TO THE CONTROL PANEL FOR READY REFERENCE Operator Instruction Manual for detailed operation Simplex nme Recorder Co specifications other were current as of publication and are subject change without notice Ed 6 93