Simplex 4005 Operating Instructions Following an Alarm Supervisory Trouble Condition
File Preview
Click below to download for free
Click below to download for free
File Data
Name | simplex-4005-operating-instructions-following-an-alarm-supervisory-trouble-condition-4862730951.pdf |
---|---|
Type | |
Size | 690.70 KB |
Downloads |
Text Preview
4005 FIRE ALARM SYSTEM OPERATING AN ALARM TROUBLE SUPERVISORY SAFETY AS WELL AS THE SAFETY OF THOSE AROUND YOU ALWAYS COMES FIRST sure you know what practices fire depend during do LED FLASHES AND TONE ALERT PULSES LED FLASHES AND TONE ALERT SOUNDS 07 06 TROUBLE Unlock and open the panel door Readand follow the instructions on display It will toggle between Screens 1 and 2 A Trouble Condition Condition described handled example A a similar manner 1 3 SUPERVISORY 0 TROUBLE 0 ZONES 02 07 06 Unlock and open panel door Read and follow the instructions the display see Screen 1 for an example 2 q 3 SUPERVISORY 0 TROUBLE ACK to review 0 Press the ALARM ACK key under the flashing red LED Readthe display The tone alert is silenced and the display shows pertinent report such as shown in Screen 3 3 Floor East Wing Detector 12 Readthe Alarm Information on the display Summon appropriate to respond TO SILENCE THE SIGNALS Press the ALARM SILENCE key and read the display The display shows signal status ALARM SILENCED LED turns ON TO RESET THE SVSTEM When the alarm condition has been cleared restore or replace affected devices smoke detectors pull stations etc in with the instructions provided with each device Reset the system Press the SYSTEM RESET key system displays Screen 4 after a completed System with no alarms present 4 Alarms Present System Reset Complete previous screen press any key Press any key to return to the SYSTEM NORMAL screen 1 0 SUPERVISORY 0 TROUBLE 3 TROUBLE ACK to review Press the TROUBLE ACK key under the flashing yellow LED the Trouble information on the display see Screen 2 for example 2 Floor East Wing Detector 12 Summon appropriate personnel Ensure that response personnel respond or replaces the device switch wire notification appliance etc in with device instructions necessary press SYSTEM RESET when the abnormal has been corrected After a short delay the system returns to normal and displays screen similar to Screen 3 3 SYSTEM NORMAL 20 July 95 your system configuration sheet Simplex for specific operations Simplex is listed in Yellow Pages not match case of trouble notify ONSTRUCU00NS BE FRAMED M MNUED UHE UNUENDED READY Operalor ffw deUaiOed opesauisoa 1995 Simplex Time Recorder Co specifications other were current as of publication are subject change Without notice 8 95