Simplex 4010 Fire Alarm System Operating Instructions Following an Alarm Supervisory Trouble Condition
File Preview
Click below to download for free
Click below to download for free
File Data
Name | simplex-4010-fire-alarm-system-operating-instructions-following-an-alarm-supervisory-trouble-condition-3620854197.pdf |
---|---|
Type | |
Size | 615.70 KB |
Downloads |
Text Preview
ALARM ALARM LED FLASHING ALARM KEY 1 2 3 FIRE ALARM SYSTEM OPERATING INSTRUCTIONS AN ALARM TROUBLE SUPERVISORY CONDITION SAFETY AND THE SAFETY OF THOSE AROUND YOU ALWAYS COMES FIRST taken during a fire depend upon local practices Be sure you know what to do LED IS FLASHING AND TONE ALERT IS PULSING LED IS FLASHING AND TONE ALERT IS ON STEADY 3 102 0 0 0 TROUBLE 0 3 ACK to review ALARM LED ALARM KEY SYSTEM RESET KEY YELLOW TROUBLE LED TROUBLE KEY Unlock and open the panel door Read and follow the instructions the display It will toggle between Screens 1 and 2 Trouble Condition is described in this example A Condition is handled in a similar manner Unlock and open panel door Read and follow the instructions on display see example below the ALARM ACK key under the flashing red LED Read the display tone alert is silenced and the display shows pertinent information such as shown below the TROUBLE ACK key under the flashing yellow LED the Trouble information on the display see example below Read the Alarm information on the display Summon appropriate to respond TO SILENCE THE SIGNALS the ALARM SILENCE key and read the display The display shows signal status SILENCED LED turns ON steady TO RESET THE SYSTEM When the alarm condition clears restore or replace all affected smoke detectors pull stations etc in accordance with the provided with each device Reset the system the SYSTEM RESET key system displays the following after a completed System with no alarms present any key to return to the SYSTEM NORMAL screen appropriate personnel to respond Response personnel should restore or replace the defective device wire notification appliance etc in accordance with device see the 574 709 manual for additional information on or dirty troubles Refer to 526 444 label for publications and revisions necessary press SYSTEM RESET when the abnormal has been corrected a short delay the system returns to normal and displays following your system configuration does not match this sheet consult for specific operations Simplex is listed in the Yellow case of trouble notify INSTRUCTIONS ARE INTENDED TO BE FRAMED AND MOUNTED ADJACENT TO THE PANEL FOR READY REFERENCE Operator s Instruction Manual for detailed operation 1998 Simplex Time Recorder Co specifications and other information shown were current as of publication and are subject to change without notice B