Simplex 4081-9306, 4081-9308, 4100-9837, 2081-9279 4100ES 4100U 4010ES Compatible External Battery Cabinet with Charger, 4081 Series
File Preview
Click below to download for free
Click below to download for free
File Data
Name | simplex-4081-9306-4081-9308-4100-9837-2081-9279-4100es-4100u-4010es-compatible-external-battery-cabinet-with-charger-4081-series-5192683470.pdf |
---|---|
Type | |
Size | 699.50 KB |
Downloads |
Text Preview
ULC CSFM Listed FM Approved NYC Acceptance Accessories 4100ES 4100U 4010ES Compatible External Battery with Charger 4081 Series battery cabinet with charger for use with model 4100ES 4100U and 4010ES fire alarm control panels For mounting and charging of sealed lead acid up to 110 Ah batteries are ordered Enclosure is a surface mounted red cabinet that close nippled to the control panel cabinet 20 ft 6 m and connected with conduit Models are available for operation at 120 VAC or VAC charger details Charger provides dual rate operation with temperature and dynamic battery testing to detect low voltage or missing battery Battery voltage charger voltage and current and status are all communicated to the control and available for display Earth fault detection and depleted battery cutout are UL listed to Standard 864 ULC listed to Standard S527 4100ES 4100U and 4010ES fire alarm panels accept batteries mounted within their For system applications requiring battery greater than the maximum Ah capacity of the panel enclosure these battery cabinets with charger can accommodate up to 110 Ah batteries and control of the remote charger is at the control panel allowing status conditions be known and displayed as required Battery Cutout For ULC listed systems the low cutout feature disconnects the batteries when they low voltage cutoff Reference Instructions Reference Battery Data Sheet Cabinet without charger for up 110 Ah Batteries 4100ES 4100U 4010ES Compatible Cabinet with Charger Batteries 2 Required for 24 V System appearance may vary Selection Battery Cabinet with Charger VAC Input Remote Cabinet with for up to Ah batteries VAC multi tapped LED Power on Indicator Kit required ULC listing mounts above access panel knockout provided Reference ordered separately Ah Sealed Battery per VDC This product has been approved by the California State Fire Marshal CSFM pursuant Section 13144.1 of the California Health and Safety Code See CSFM Listing for allowable values and or conditions concerning material presented in document It is subject to re examination revision and possible cancellation UL and fire alarm system requirements are satisfied when 2081 9279 batteries are used these remote battery cabinets and chargers 2081 9279 batteries are equipped with arrester vent caps in accordance with UL Standard 924 requirements Additional may be applicable contact your local Simplex product supplier for the latest Listings and approvals under Simplex Time Recorder Co are the property of LP Westminster Cabinet and Charger Specifications Specifications rate temperature compensated for batteries 55 Ah to 110 Ah recharges batteries within 48 hours per UL Standard 864 and to 70 capacity in hours per ULC Standard S527 lead acid batteries ordered separately VDC nominal Standby Current Requirement mA Output Protection A fast acting fuse charger is reverse polarity protected Type Type and Capacity Output Voltage Power Requirements VAC Input Models VAC Input Models and Mechanical Range Range Connections 102 to 132 VAC 60 Hz 4 A maximum 2 A maximum 187 to 264 VAC 50 60 Hz separate taps for 220 230 240 VAC to 122 0 C to 50 C to 93 RH non condensing 100.4 F 38 C maximum Input Terminal block for 14 to 12 AWG Battery Output Terminal block for 14 to 6 AWG wire 5 terminals each for and from Control Panel ft 6 m maximum in conduit Hardware and Cables and cables to connect to 2081 9279 110 Ah batteries harness 20 ft long 6 m Battery connection harness to distribution module PDM wire equivalents 14 AWG 2.08 mm2 12 AWG 3.31 mm 6 AWG 13.3 mm2 2081 9279 Battery Specifications Voltage per battery per battery Cabinet Dimension Reference Ah rating at 20 hour discharge rate V per battery 2 required for 24 V system current terminal posts W x 9 H x 10 1 2 D 284 mm x 230 mm x 267 mm lbs 37 kg is a registered trademark of Tyco International Services GmbH and is used under license Simplex and the Simplex logo are trademarks of Tyco International Ltd and its and are used under license LP Westminster Westminster MA 01441 0001 USA 2011 Tyco All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice 708 mm 13 1 2 343 mm 14 5 8 371 mm deepLocking top is hinged at back andheld open with built in supportAccess coverfor AC inputSide panel isremovable foraccess to batteryconnections andcharger assemblyfirealarmresources com