Simplex 4098-9804 Relay Module Installation Instructions

File Preview
File Preview
Click below to download for free

File Data

Name simplex-4098-9804-relay-module-installation-instructions-7492365801.pdf
Type PDF
Size 684.81 KB
Downloads

Text Preview

a Simplex Relay Module the following procedures install the 4098 9804 Relay Module with the following bases 2098 9651 Addressable Detector Base 4098 9781,4098 9782 4098 9783 TrueAlarmTM Sensor Bases 4098 9804 A separate 24VDC power source must be provided module has two Form C outputs The module the relay activated by the remote LED output of the 4098 9804 energizes whenever base LED output is turned ON LED output of the base is turned ON steady pulsing LED output is ignored When its sensor is in alarm or trouble or when its detector in a arm only When activated via the 4100 keyboard Only 10 LED outputs can be activated at any one time the relay module using Figure 1 as a reference not use a remote LED if wiring the 4098 9804 module the remote LED output of the SEE NOTE 1 NOTE 4 NOTE Z MODULE Do not use remote LED 18 to 32VDC 008 amps typical 01 3 amps max Contact A or B Dry Form C each rated 2 amps at 24VDC or 0.5 amps resistive at 11 OVAC Blue and white wires are only available on 4098 9781 and 9783 Sensor Bases Use LED and LED 2098 9651 Addressable Detector is Patent Pending Module Connections 1 1991 Simplex Time Recorder Co Gardner MA 01441 0001 specifications other were current as of pubkatlon are subject change wthout now 022 574 671 the relay module using Figure 2 as a reference 10.16cm DEEP SUPPLIED NOTE 1 1 i 2 13.61 cm UNC 2A LONG 412 077 BRACKET 617 686 NOTE 3 41 Z 064 SHOWN NOTE 4 Use only a 4 10.16cm octagonal box 2 i 8 54cm deep with 1 l 2 3.81 cm extension ring or 4 square box 1 112 deep 1 l 2 extension Minimum box volume required is 32.3 cu 529.4 cu cm Mount relay module directly behind base and sensor detector head Do not mount remotely Mounting bracket is not used with a 2098 9651 detector base Mounting bracket is used only with a 40969781 or sensor base The 4098 9701 4098 9716 and 4098 9731 sensor heads are compatible with the 4098 9781 4098 9782 and 4098 9783 and 2098 9576 detector heads are compatible bases The 2098 9201 2098 9202 2098 9203,2098 9438 the 2098 9651 detector base Relay Module 2 4 91

Related Files