Simplex 4098-9819, -9824 In-Duct Adapters - Installation Instructions

SSimplex In Duct Adapters Sensor Assembly to install the 4098 9819 duct installation Notes the appropriate 9824 In Duct Adapters 4098 9819 or 8 Inch 4098 9824 when using the 4098 9708 or 9709 TrueAlarm a six or eight inch Adapter duct installation Use the Installation Notes and illustration a 6 inch round duct installation or the 4098 9824 a 8 inch Adapter when installing TrueAlarm Sensor Assembly a round duct Round Duct Adapter Round Duct Adapter head screws the four 632 too head screws securing the front cover to the sensor assembly Remove the front cover and secure the In Duct Adapter onto the sensor assembty using four 8 self tapping slotted sheet metal screws wiring to the sensor assembly per PER 21 039 574 699 the front cover onto the housing using the four X2 the duct gasket as a template position the gasket on the round duct as shown in the illustration then trace the hole pattern onto the round duct out a hole on the round duct using the traced pattern the duct gasket backing to expose its adhesive Align gasket hole to the round duct hole and attach the gasket backing onto the round duct the smoke sensor into the cutout hole on the round duct then shii the smoke sensor until it is centered on the gasket forward pressure against the sensor assembly to make solid contact with the duct gasket Install two l 2 inch long sheet metal screws to secure the top two screw positions of the In Duct Adapter onto the round duct downward pressure against the sensor assembly to force a seal between the In Duct Adapter and the duct Install two 8 x l inch sheet metal screws to secure the bottom two screw hole positions of the In Duct onto the round duct H INCH ADAPTER x M INCH LONG SHEET SCREW GASKET OR 8 INCH DUCT TORX SCREW SLOlTED SHEET SCREW following an digit Product ID number denotes ULC listed product 19 Simplex sqkficatians Recorder Cc Gardner MA 01441 0001 oUwr information were curmnt as of fnhkation are subject change wtUxut notice 96