Simplex 4100-6072, -6073, -6074, & -6075; 4190-9021, -9022, -9023, -9024, -9025, & -9026 Multiple Signal Fiber Optic Modems and Accessories for Panel and Remote Mounting (B)

ULC CSFM Listed Approved multiple fire alarm communications into a single fiber optic link to Multiplex audio signals analog and or digital AND communications into full duplex transmission a single fiber optic cable noise rejection due to the inherent nature of optic communications Communicate from a Fire Alarm Control Panel to a or provide Network communications Provide Network communication support for Ring Hub Star Topologies and their combinations by the function of a Physical Bridge without data rates optical transmitters provide transmission distances compared to copper over 20 miles 32 km may be possible with single mode fiber Designs are optimized for fiber type select models for mode fiber or models for multi mode fiber Analog Audio EAA feature Provides a decoded analog audio signal at the receiving for local use AND also provides the original encoded signal for connection to the next in the communications link With EAA total system distance is essentially unlimited combinations include Digital Audio Riser Analog Audio Riser 2 Network Digital Audio Riser Analog Audio Riser 2 RUI Unit Interface Communications Both Analog Audio Risers Network Communications Both Analog Audio Risers RUI Communications Or any of the signals individually refer to application on pages 4 and 6 for more details mounted applications Standard two Slot module for 4100ES and 4100U Fire Control Panel or 4100ES 4100U MINIPLEX mounting A separate mounting plate is available for 4100 4120 mount or utility cabinet mounting Note Fiber Modems communicate in pairs a Left Port only communicates with a Right Port Modem Modem remote cabinet mounting Available in beige or red includes a Left Port Fiber space is provided for a Right Port Fiber ordered separately Compatible with Simplex control panel model Series 4100U 4010ES 4010 4190 Series TrueSite RUI compatible equipment and legacy Control Panels Multiple Signal Fiber Optic Modems and for Panel and Remote Mounting Transponder or Network Node and Output path B and Output NNEC T POWER EFORE RVICING POWER path for X Style 7 Duplex Bi Directional over a Fiber Optic Cable and Input Return Panel System Reference with Data Fiber Modems Continued Audio Expansion Modules Provide an interface to 25 VRMS and 70.7 VRMS audio from 4100 4120 fire alarm control panels Listed to Standard 864 Signal Fiber Optic Modems combine system communications signals and converts to fiber optic communications for transmission via a full duplex fiber optic cable connection that field wiring and increases transmission Communications can be sent individually or Information For additional application refer to Installation Instructions 579 831 This product has been approved by the California State Fire Marshal CSFM pursuant to 13144.1 of the California Health and Safety Code See CSFM Listing 7165 0026 251 allowable values and or conditions concerning material presented in this document It is to re examination revision and possible cancellation MEA NYC Approvals are not for this product category Additional listings may be applicable contact your local product supplier for the latest status Listings and approvals under Simplex Time Co are the property of Tyco Fire Protection Products 2 2012 Operation Bi Directional Communications Fiber optic are accomplished by transmitting and over two different light wavelengths refer to on page 3 In order to complete a fiber optic complementary receive transmit modem pairs are The two required modem versions are identified Left Port Modems and Right Port Modems refer to list for model numbers One of each is required to the fiber optic communications link are designated for reference purposes only and not refer to actual physical locations Connections Each modem has field wiring for the Digital Audio Riser Analog Audio RUI and Network communications see page 5 for reference information Configurations are by on board switch and jumper selections operation is essentially transparent to the connected However Fiber Modems are entered into the programmer for current calculations and mounting Modem Terms Enhanced Analog Audio For systems only using one Audio Riser At the Head End audio control panel Riser 1 analog audio signal is digitally encoded and via fiber optics to the receiving Fiber Modem the receiving modem the digital signal is decoded back analog for local use but when selected for Enhanced Audio EAA the digitized signal is also available to the DAR Digital Audio Riser terminals It can be wired to the next Fiber Modem in the link without requiring additional signal Note The next modem in the link must be in same cabinet or in a close nippled cabinet With Riser 1 distances are limited to system distances EAA Riser 1 signals can be passed through a of six 6 Fiber Modem pairs which is also the for systems using both Analog Audio Risers 1 and 2 connections for digital audio are not available since terminals are used for EAA Refer to the diagram page 3 for more detail Modem Fiber Modems in a stand alone or in a Network loop have specific functions and settings depending on whether they are for Class 7 systems the first modem Head End or the last Tail End or a modem between the first and last identification modem will be used for B connected modems and for those modems located a Class X fiber loop and not functioning as the or Tail End modem Modem For Class X communications a modem is the first fiber optic modem in a optic communications loop and is typically to the primary side of the communications in the head end cabinet A modem with wired to Network nodes or system transponders itself and the head end cabinet is still considered be the head end modem if it is the first fiber optic in the communications path Side The Side of a wiring link has direct electrical connection to the head end terms are continued next page Product Selection see page 8 for product dimensions except as noted Modems for Internal Mounting in Fire Alarm Control Panels Type Single Mode Multi Mode Single Mode Multi Mode Fiber Modem Assembly Fiber Modem Assembly direct mounting onto a 4100ES 4100U expansion bay Fiber are required to be ordered in pairs Left Port Fiber communicate only to Right Port Fiber Modems Fiber Modem Mounting Bracket not for 4100ES 4100U internal mounting Fiber Modems separately Audio Expansion Module Assembly with bracket Audio Expansion Module only mounts onto of 4100 9841 for internal mounting in a 4100 4120 Series fire alarm panel or in a compatible utility cabinet for internal mounting in a 4100 4120 Series fire alarm panel converts two analog audio input channels at VRMS or 70.7 VRMS to 10 VRMS for compatibility with the Modem Audio Input requirements mounts next to Fiber Cabinet and Related Modem Assemblies for Remote Mounting Type Cabinet with Fiber Modem see page 7 for details Single Mode Multi Mode Single Mode Multi Mode Single Mode Right Port Fiber Modem Assembly Multi Mode Audio Expansion Module for Expansion Cabinet Expansion Cabinet Mounting only mount external to compatible panels where internal space is