Simplex 4100ES Fire Control Panels; AUTOCALL TFXnet Network Interface (TFXi) Connection to the 4100ES Fire Alarm Control Panel, Feature 4100-6068

DISCONTINUED FOR REFERENCE ONLY Control Panels AUTOCALL TFXnet Network Interface TFXi Connection the 4100ES Fire Alarm Control Panel Feature 4100 6068 CSFM Listed a 4100ES fire alarm control panel to TFXnet Networked fire alarm control information mapping allows 4100ES fire control panel status information to be to the TFX Network control panels TFX Network Master provides Acknowledge and Reset to the 4100ES information is mapped between the 4100ES the AUTOCALL TFX on a point basis per the include Alarm Trouble Supervisory and information TFX Network Nodes total 4100ES Network with 4100 6068 TFXi Feature 62 Network Interface Feature 4100 6068 three internally mounted modules TFXi RS 232 Module formerly the 4100 6062 provides communications between the 4100ES the TFXnet Communications Module this single module mounts in the CPU bay or an expansion bay TFXnet Communications Module TLT 530 to the external TFX network for the TFXnet Communications Module is by a dedicated power supply module the TFXnet Communications Module and its supply module are mounted on a common requiring a double wide 4100ES block space x 10 horizontal Listed to Standard 864 Network Expansion Flexibility When a fire system using existing TFX Network fire alarm panels requires expansion use of the 4100 6068 Feature allows the expansion to include the of the 4100ES fire alarm control panel Node Standard operation is for the 4100ES to a TFXnet node capable of sending its point status to the network Typically all programmed points would go to the TFX Network The TFX Master provides Acknowledge Silence and The 4100ES does not provide that control to the Network special applications with point capacity and control the 4100 6068 TFXi Feature will allow the to be configured either as a peer to peer member of the TFXnet Network or to be the TFXnet master panel Contact your local SimplexGrinnell for application guidance TFX Network Interface Block Diagram Mapping TFX Network point groupings and information is formatted differently from the With the 4100 6068 TFXi Feature events are by programming a table of 4100ES to TFX point associations Point status is then sent to the TFX from the 4100ES Module Considerations The 4100 6068 Feature is a unique card type whose function one Computer Port Protocol resource For the 4100ES can support up to five RS 232 type two are available for special features modules such the 4100 6068 or a DACT SafeLINC Internet or Computer Port Protocol device the ports can be assigned for printer support up to total additional information refer to 4100 6068 and Programming Guide 579 902 Additional interconnection reference for the AUTOCALL Interface Boards may be found in Installation 19700344 This product has been approved by the California State Fire Marshal CSFM pursuant to 13144.1 of the California Health and Safety Code See CSFM Listing for allowable values and or conditions concerning material presented in document This product was not ULC listed or approved by FM or MEA NYC as of revision date Additional listings may be applicable contact your local Simplex supplier for the latest status Listings and approvals under Simplex Time Recorder are the property of Tyco Safety Products Westminster Panel with TFXnet Network InterfaceTFXnet Network Communications LoopTLI 5304100ES Fire Alarm Control Panel4100 6068 TFX Network Interfacefirealarmresources com Specifications TFXi Feature Specifications supplied RS 232 Module 132 mA both for supervisory and alarm Standby Communications and Power Supply Assembly mA both for supervisory and alarm for 4100 6068 260 mA both for supervisory and alarm RS 232 Module 2 Slot on 4100ES CPU bay preferred or on expansion bay x 11 1 2 mother board is included 51 mm x 292 mm x 10 102 mm x 254 mm module reference size horizontal mount two horizontal expansion bay blocks actual mounting bracket 8 W x 6 1 2 H 203 mm x 165 mm Communications and Power Supply Assembly Allocation Requirements Reference Refer to Installation Instructions 579 902 for mounting details 4100 6068 TFXi Feature per 4100ES consumes one Computer Port Protocol device resource node capacity TFXnet Networks accommodate up to 62 Network Nodes maximum Network Node Reference Mix Reference Mapping Reference Information Temperature Range Range Information total of TFX Nodes 4100ES Nodes with 4100 6068 TFXi Feature 62 maximum 1 existing Network with 50 TFX Nodes can expand with up to 12 4100ES with the 4100 6068 TFXi Feature 2 existing Network with 61 TFX Nodes can add only one 4100ES Node the 4100 6068 TFXi Feature point requirements capacities are to 1268 individual points of Alarm Supervisory and Trouble 1 Common 1 Acknowledge no Silence and no Reset 1270 points total TFX Network Master provides Acknowledge Silence and Reset to the the 4100ES does not provide that control to the TFX Network F to 120 F 0 C to 49 C to 93 RH non condensing 90 F 32 C Software Revision Network Interface Modules revision 3.2 Panels revision 12.0 or higher 4100 6068 TFXi Feature Installation Reference Panel with TFXnet Network InterfaceTFXnet Network Communications LoopPort ATLI 530Power ModuleTLT 530 ModuleSingle slot 2 wide motherboardTFXi RS 232 Modulemodule assembly is harness wired orientation shown is for referenceInterconnection ReferenceP34100ES Fire Alarm Control PanelRS 232 connection harness RJ11 to DB25 to Port A 14 ft 4.3 m long P N 734 165 TFXi RS 232 Module formerly 4100 6062 provides interface to 4100ES shown mounted in the CPU bay preferred location if available TFXi RS 232 Module alternate location mount in available expansion bay spaceInternally mounted TFX Network communications module TLT 530 and power supply interface module on common mounting bracket Note Modules harness and mounting bracket shown and power and interconnect harnesses not shown are included with the 4100 6068 TFXi Featurefirealarmresources com is a registered trademark of Tyco International Services GmbH and is used under license Simplex the Simplex logo AUTOCALL and SafeLINC are trademarks of Tyco Ltd and its affiliates and are used under license 2011 Tyco Safety Products Westminster All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice Safety Products Westminster Westminster MA 01441 0001 USA