Simplex 4100ES Fire Control Panels; Single Bay 4100ES Cabinet, Module Mounting Options

Fire Control Panels Single Bay 4100ES Cabinet Mounting Options CPU Slots 1 2 Bracket x 5 and 4 x 10 module shown for reference 4100 9852 Reference Drawing brackets allow alternate Simplex module sizes to mount in Slots 1 and 2 the CPU bay for single bay cabinets For standard 4100ES non EPS applications where bay Slots 1 and 2 are not otherwise assigned Note Bracket is not required for a single bay 4100ES EPS Enhanced Power Supply Bracket 4100 9852 supports up to two single block x 5 modules or one dual block 4 x 10 module Slots 1 and 2 are commonly used for DACT Physical VESDA Interface IDC Modules or Dual Modules Bay Slots 1 and 2 module reference Single 4100ES cabinets are selected when the fire alarm features required at that location are compatible the capacity of that cabinet size CPU bay Slots 1 2 are commonly used for the following modules Physical Bridge VESDA Interface IDC connections or Dual RS 232 connections these modules are not required Slots 1 and 2 are for expansion modules by selecting bracket 4100 9852 allows mounting of one or two block 4 x 5 102 mm x 127 mm modules or of 4 x 10 102 mm x 254 mm dual block module General Reference Cabinet Reference Sheet Reference Agency listings for these mounting brackets are not applicable Please refer to panel and module data sheets for applicable agency approvals and listings 10 2014 SIMPLEX and the product names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited Fire Protection Products Westminster MA 01441 0001 USA 10 2014 2014 Tyco Fire Protection Products All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice