Simplex 4190 Graphical Command Center (GCC) - Installation and Checkout Instructions

4190 Graphical Center and Checkout Instructions C and Trademarks Simplex Time Recorder Co 2000 All rights reserved Printed in United States of America in this document is subject to change without notice No part of this may be reproduced or transmitted in any form or by any means or mechanical for any purpose without the express written consent of Time Recorder Company Test is protected by US Patent No 4,725,818 addressable communications is protected by US Patent is patent pending Analog Detection is protected by US Patent No 5,155,468 Detector Base is protected by US Patent No 5,173 683 and Warnings Reacceptance Test REACCEPTANCE TEST AFTER SOFTWARE CHANGES To proper system operation this product must be tested in accordance with Chapter 7 after any programming operation or change in site software Reacceptance testing is required after any change addition or of system components or after any modification repair or adjustment to hardware or wiring components circuits system operations or software functions known to be by a change must be 100 tested In addition to ensure that other are not inadvertently affected at least 10 of initiating devices that not directly affected by the change up to a maximum of 50 devices must be tested and proper system operation verified the instructions in the installation operating and programming manuals instructions must be followed to avoid damage to the control panel and equipment Fire Alarm Control Panel FACP operation and depend upon proper installation NOT INSTALL ANY SIMPLEX PRODUCT THAT APPEARS Upon unpacking your Simplex product inspect the contents of the for shipping damage If damage is apparent immediately file a claim the carrier and notify Simplex HAZARD Disconnect electrical power when making any adjustments or repairs Servicing should be performed by qualified Representatives FREQUENCY ENERGY This equipment generates uses and can radio frequency energy and if not installed and used in accordance with instruction manual may cause interference to radio communications It has tested and found to comply with the limits for a Class A computing device to Subpart J of Part 15 of FCC Rules which are designed to provide protection against such interference when operated in a commercial Operation of this equipment in a residential area may cause in which case the user at his own expense will be required to take measures may be required to correct the interference to Use this Publication viii Used viii Conventions viii Conventions ix the Mouse ix 1 Before You Begin 1 1 this Chapter 1 1 Started 1 2 the Equipment 1 2 the Equipment 1 2 the Equipment 1 2 Documentation 1 2 2 Installing the Hardware 2 1 this Chapter 2 1 Requirements 2 2 Requirements for Windows 95 Computers 2 2 Requirements for Windows 3.1 Computers 2 2 Hardware Requirements for Fire Applications 2 3 the Equipment 2 4 2 4 the GCC to the System 2 5 the Equipment 2 5 the Monitor 2 7 a Touchscreen Monitor 2 8 The Mouse 2 8 The Keyboard 2 8 The Software Key 2 8 The Printer Optional 2 8 the Optional Uninterruptible Power Supply UPS 2 9 to a Network 2 9 3 Installing the GCC Software 3 1 this Chapter 3 1 Requirements 3 2 Requirements 3 2 Software 3 2 the Software 3 3 Windows 95 3 3 Windows 3.1 3 4 Mouse Software Windows 3.1 3 6 Touchscreen Software Windows 3.1 3 7 Touchscreen Software Windows 95 3 8 Touchscreen Software for Windows 3.1 3 8 the Optional Tape Drive Software from Floppy Disk All systems 3 9 the Optional Tape Drive Software from CD Rom Disk All systems 3 10 the Windows WIN INI file for Optional Tape Drive All systems 3 10 the 4190 GCC Software 3 11 to Both Windows 3.1 and Windows 95 systems except noted 3 11 and Operating the SPC 2120 Utility 3 15 3 15 3 15 Procedure 3 15 the SPC 2120 Utility 3 16 the Computer Ports 3 17 Configuration Procedure 3 17 2120 Points 3 20 to Add 2120 Points to the Point Database and Network 3 20 GCC Checkout 3 22 to Checkout the GCC 3 22 4 Installing the GCC Rack Mount Versions 4 1 this Chapter 4 1 the Rack Mount Components 4 2 Procedure 4 2 5 Connecting 2120 Nodes 5 1 this Chapter