Simplex 4903 Series TrueAlert Non-Addressable Speaker Visible, with strobe selectable as Free-Run or Synch (B)(E)(F)

File Preview
File Preview
Click below to download for free

Text Preview

TrueAlert Notification Appliances Speaker Visible Notification Appliance with TrueAlert ULC Listed FM CSFM MEA NYC Approved Non Addressable Strobe Selectable as Free Run or Synchronized notification appliance with speaker and high intensity xenon details High quality voice and tone reproduction with taps for 1 2 1 or 2 W at 25 or 70.7 VRMS Capacitor input for connection to supervised notification circuits Speakers are wired separately from strobe wiring Listed to UL 1480 and to ULC S541 with 2 W tap to page 4 for details Non Addressable visible notification strobe Models available with 15 75 or 110 candela 24 VDC operation with switch selection for free run or flash rate Listed to UL 1971 and ULC S526 Compatible with ADA requirements refer to important information on page 3 Strobe candela rating is clearly indicated on reflector Rugged high impact flame retardant thermoplastic available in red or white covers are available to convert color UL listed red wire guard is available for surface or mounting appliance design provides Flexible easy and convenient flush or surface wall box Separate in out wiring terminals for speaker and strobe AWG to 12 AWG non addressable speaker visible S V appliances combine a multi tapped and a high intensity strobe to provide audio tone and visible notification from the same and strobes are wired separately The speaker is with taps available for either 25 VRMS or VRMS and the strobe is selectable for either free run synchronized operation Refer to page 2 for specific product listing details This product has been approved by the State Fire Marshal CSFM pursuant to Section 13144.1 of the California and Safety Code See CSFM Listing 7320 0026 247 for allowable values and or concerning material presented in this document It is subject to re revision and possible cancellation Accepted for use City of New York of Buildings MEA35 93E Additional listings may be applicable contact local Simplex product supplier for the latest status Listings and approvals under Time Recorder Co are the property of Tyco Safety Products Westminster S V Appliances are Available in Red with White and White with Red Lettering Selection selection of visible notification is dependent on location local codes and proper applications the National Fire Alarm Code NFPA 72 ANSI the appropriate model building code BOCA or SBCCI and the application guidelines of the with Disabilities Act ADA Operation non addressable S V strobes can be set free run operation or synchronized operation using an selection switch When selected for operation flash operation is controlled Synchronized Flash Modules 4905 9914 Class B 4905 9922 Class A 4008 4100U and 4010 Fire Alarm Control refer to individual product data sheets for IDNet NAC Extender models 4009 9201 and refer to data sheet S4009 0002 9 2009 Product Selection Wall Mount Notification Appliances with TrueAlert Non Addressable Strobes Number Output Rating cd cd cd Adapters and Boxes mount red adapter skirt mount white adapter skirt when mounting to surface electrical box 4 square deep with 1 1 2 deep not ULC listed Plate red required to mount S V on 2975 9145 box red for surface or flush mount requires adapter plate this box may be available for retrofit applications Flash Control Modules Flash Module B Style Y operation Flash Module A Style Z operation encapsulated with in out AWG 0.82 mm2 wire leads for 2 A NAC requires 5 mA for refer to data sheet for additional flash module information Color with white lettering with red lettering H x 5 3 8 W x 3 3 16 D mm x 137 mm x 81 mm with S V 5 7 8 149 mm H x 5 3 4 W x 0.060 Thick mm x 146 mm x 1.5 mm H x 5 1 8 W x 2 3 4 D mm x 130 mm x 70 mm W x 2 7 16 L x 13 16 H mm x 62 mm x 20 mm and Guard covers are for replacement or color conversion S V cover with white lettering S V cover with red lettering guard with mounting plate red compatible with surface and boxes UL listed by Space Age Electronics Inc H x 5 W x 1 3 8 D mm x 127 mm x 35 mm H x 6 1 16 W x 3 1 4 D mm x 154 mm x 79 mm 9 2009 Installation Reference to 2975 9145 Box Electrical Box Mounting Box 4 102 mm square box 1 1 2 38 mm with a 4 square box extension 1 1 2 by others Plate input terminals and speaker tap accessible from rear assembly housing lens assembly assembly mode selection switch cover required Installation Reference Adapter Skirts are not ULC listed INSTALLATION HEIGHT REFERENCE square box outline Mounting Reference Optional Wire Guard mount conduit and shown for reference outline 2.1 m 102 mm 38 mm 2 m 72 requires that the lens be not less than and not greater than 96 the finished floor 102 mm square box 1 1 2 38 mm with 1 1 2 extension 4905 9998 Guard mount adapter skirt 3 3 16 81 mm required for this mounting method Red 4905 9947 White conduit are provided on all four sides 9 2009 S V Specifications Specifications Voltage Range Rate and Synchronized NAC Loading RMS Current Rating per Strobe see Note 2 below Currents other voltages Specifications Voltage Taps Alarm Frequency Response 24 VDC see Notes 1 below Hz with up to 35 synchronized strobes maximum per NAC cd mA mA mA VDC VDC cd mA mA mA cd mA mA mA or 70.7 VRMS see Note 3 below 1 2 1 and 2 W to 4000 Hz Output Tap Chamber Test UL 1480 10 ft 3 m Chamber Test ULC S541 3 m 10 ft Polar Dispersion Reference ULC S541 Anechoic Chamber Testing NOTE ULC Fire Alarm applications require use of 2 W tap W dBA dBA dB W dBA dBA W dBA dBA dB W dBA dBA 30 off axis 55 off axis Specifications Dimensions including lens into Box Tap Selection Range Range x 6 7 8 x 2 5 8 D 121 mm x 175 mm x 67 mm 70 mm jumper wire with pressure connector attaches to one of 8 terminals to 122 F 0 to 50 C to 93 non condensing at 100 F 38 C for 18 to 12 AWG 0.82 mm2 to 3.31 mm2 separate terminals for and strobe connections 24 VDC refers to the voltage range of 16 to 33 VDC per UL Standard 1971 Signaling Devices for the Hearing changes effective May 1 2004 This voltage range is the absolute operating range Operation outside of this range cause permanent damage to the appliance Pl

Related Files