Simplex Addressable Manual Stations; 2099 Series Single and Double Action

Multi Application Peripherals and Accessories Manual Stations Series Single and Double Action Operation Plastic rod drops harmlessly inside when handle is Listed Single action models Breakglass type double action models option Key operated only Recessed pull lever Pull lever protrudes when alarmed Tamper resistant reset key lock Keyed same as fire alarm cabinet Surface or semi flush mounting Terminal connections for field wiring 2 Stage Operation Flush mounting option English French or Bilingual 2099 series addressable pull station employs an addressable module IAM to provide monitoring of the station status Changes in are communicated to the control panel across the communication lines manual station IAM receives its power from the communication lines The addressable manual is available in single or double action models and one or two stage operation Both single and models are available for details of model refer to the following page single action station requires a firm downward pull to break plastic rod visible below the pull lever and actuate the switch sound the alarm The front of the station is hinged and must be to reset the station and to replace the plastic rod glass double action station requires that the hammer hung on front of the station be lifted and thrown downward against glass window thus breaking it to expose the recessed pull As with the single action station a firm downward pull of pull lever actuates and locks in the alarm switch operation is achieved by inserting the GA key into keyswitch after the lever is activated and turning it to right Action Station Action Breakglass reset the single action station a key unlocks and opens the which then permits the handle to return to its normal when the station is relocked If a plastic rod is used it be replaced in order to complete the reset process double action station is reset in the same manner The rod is normally omitted but the glass window must replaced in order to complete the reset process of the breakglass station should be accomplished physical activation of the pull lever station is constructed of a tough high impact red The finish is high gloss and smooth to resist and dirt residues 2001 Simplex International Time Equipment Co Ltd 6 01 Manual Station Specification Chart Station Models Key B C B C B C B C B C B C B C B C B C B C B C B C SHOWN ARE ENGLISH LANGUAGE ADD FOR FRENCH FOR BILINGUAL Normally Open Contact N C Normally Closed Contact 2099 9795C 2099 9795CF 2099 9795CB Trim Plate Trim Plate surface mount box sheet metal 5 3 16 H x 4 W x 2 11 16 D 127 mm x 102 mm x 68 mm address pull station spacer S01575 033 Installation Instructions for further information Options Surface Trim Wiremold box 1 8 H x 5 W mm x 127 mm Semi flush trim 2 gang box H x 4 1 2 W mm x 114 mm receptacle by others 2975 0001 3 16 H x 4 W x 2 11 16 D mm x 102 mm x 68 mm 2975 9312C knockouts 3 16 H x 4 W x 2 11 16 D mm x 102 mm x 68 mm also be used A C box others Spacer by Simplex others conduit entry B D 6 01 Skymark Avenue Mississauga Ontario L4W 5K5 us on the world wide web at www simplexnet com specifications and other information shown were current as of printing and are subject to change without notice Printed in Canada