Simplex Audible Notification Appliances (Horns) 4901-9822 Electric Horn

UL listed to Standard 464 Listed FM CSFM MEA NYC Approved current 24 VDC electronic design polarized input for connection to reverse supervised Notification Appliance housing with white lettering semi flush or surface wall mounting Mounts to standard 4 inch square outlet box In out wiring terminals for 18 to 12 AWG Surface mounting requires adapter plate 4905 9909 impact flame retardant PC ABS with Simplex modular audible visible plates Models 4905 9921 and 4905 9925 Simplex 4901 9822 electronic horn is an audible appliance that provides a loud and penetrating Horn output is a steady harmonically rich sound can be easily coded by the controlling notification circuit NAC horn will mount semi flush on a standard 4 square mm electrical box and has wiring terminals capable accepting up to 12 AWG wire Optional accessories are to increase mounting and application flexibility to page 2 for details This product has been approved by the California State Fire Marshal CSFM pursuant to 13144.1 of the California Health and Safety Code See CSFM Listing for allowable values and or conditions concerning material presented in document It is subject to re examination revision and possible cancellation for use City of New York Department of Buildings MEA35 93E This was not ULC listed as of document revision date Additional listings may be contact your local Simplex product supplier for the latest status Listings and under Simplex Time Recorder Co are the property of Tyco Safety Products Peripherals Audible Notification Appliances Horns Electronic Horn Electronic Horn Voltage Range VDC to 33 VDC Size mA AWG to 12 AWG mm2 to 3.31 mm2 Output 10 ft 3m UL 464 Reverberant Test dBA 16 VDC dBA 33 VDC Output to 3700 Hz sweep at 120 Hz rate Temperature F to 120 cid 113 F 0 cid 113 C to 49 cid 113 C Range Dimensions to 95 Non condensing 86 F 30 C H x 4 3 4 W x 1 3 16 D mm x 121 mm x 30 mm Depth 46 mm into Box 16 mm The rated voltage range listed is the absolute operating range outside of this range may cause permanent damage note that 16 VDC is the lowest operating voltage that is at the last appliance on the notification appliance circuit worst case conditions NAC voltage drops and standby calculations should be made using anticipated operating 4 2005 Product and Accessories Horn red housing with white lettering Mount Adapter Plate zinc plated 4 7 8 square 124 mm required for mounting surface mount 4 102 mm square box Adapters for combining audible and visible notification appliances onto a common plate refer to Simplex data sheet S4903 0007 Mounting Information Square 1 1 2 deep box 190 or equal by others R5752 2 gang box square 1 3 8 deep by no adapter plate required Mount Adapter Plate required surface mount to 4 square box Mount Simplex and the Simplex logo are trademarks of Tyco International Services AG or its affiliates in the U S and or other countries 2005 Tyco Safety Products Westminster All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice Safety Products Westminster Westminster MA 01441 0001 USA 4 2005