Simplex Bell Specifications and Installation Manual

Simplex Bell Specifications and Installation Manual Perfect bell solution for schools and other facilities Can be controlled by a Simplex Master Clock via programmable relays Both indoor and outdoor models available Continuous ringing when power is applied Excellent decibel levels for each size Phosphate rust protected Completely assembled gong shell UL and cUL listed Universal back plate for mounting on standard single gang utility box vibrating bells produce a continuous ringing sound as long as power is applied The bells are at 24 VAC 50 60 cycle available in 6 8 and 10 gong sizes Size Number VAC Ohms Current Amps at 10 lbs Kg Information for indoor use only A BELL IN for both outdoor indoor use A BELL OUT 7 8 13 16 13 16 10 3 8 3 8 13 16 3 8 3 8 3 8 3 8 1 4 1 4 Indoor Bells bells 7 17 installation has never been easier There is no need to remove the gong shell simply follow the proper and the installation process will be quick and easy Mounting instructions Model Do not remove gong shell Fasten the back plate securely to the gang box or to the wall with the tongue pointing up Connect wires to solenoid leads push excess wire into outlet box Insert tongue of mounting plate into bracket slot and secure housing to plate using the acorn nut with bell unit SLOT SLOT SLOT MODEL MODEL Model Do not remove gong shell PLATE INTERIOR INTERIOR SLOT INTERIOR SLOT VIEW OF VIEW OF BELL BELL VIEW OF BELL MODEL MODEL Fasten weatherproof back plate using the two side tabs Observe the up marking in the box Make electrical hook up to solenoid leads with wire nuts or any approved method Engage housing on pin press it down firmly and secure it to back box using the 8 32 x 5 8 self tapping furnished with bell unit INTERIOR VIEW OF BELL OPENING INTERIOR OPENING OPENING VIEW OF BELL MODEL MODEL BOX INTERIOR BOX BACK PLATE OPENING INTERIOR INTERIOR OPENING VIEW OF BELL and the product names listed in this material are marks and or registered marks Unau use is strictly prohibited sheets may change without further notice BOX INTERIOR VIEW OF BELL VIEW OF VIEW OF BELL BELL MODEL WITH GUARD MODEL WITH GUARD MA 01441 U S A 7 17