Simplex Celestra 2000 6334 Series, 2 5 and 4 Inch LED Displays, Digital Clock Assemblies

2000 Digital Clock Assemblies 2.5 and 4 LED Displays Listed Features LED Displays available in red amber or green LED Displays available in red amber green or Multiple Correction Modes Digital BCD Synchronous Clock Correction Power Line Carrier Option Power Drop Operation Stand Alone Operation or 24 Hour 00 23 Display Switch Selectable High Impact Flame Retardant Molded Case Built in Time Setting Switches Version is ETL and cETL Listed and to UL 1950 Version is CE Marked Surface and Bi Directional Wall and Mounting Display Brightness Switch Description Simplex Celestra 2000 digital clocks provide high under a variety of ambient light conditions 6334 9125 through 9137 have a 2.5 high for applications where the viewer may be close to clock such as in an office or a classroom Models through 9152 have a 4.0 high display for viewing distances such as in an auditorium long hallway warehouse or manufacturing Model 6334 9144 features 6 digit display Specifications Voltage Consumption Temperature Clock Dimensions Clock Dimensions VAC 100 132 VAC VAC 200 252 VAC W 5100 black with amber or red LED display F to 95 F 0 to 35 C non condensing W x 5 H x 2 1 2 D x 12.7cm x 6.4cm W x 7 1 16 H x 2 1 2 D x 17.9cm x 6.4cm Operation independent operation the clock is connected to a source of 120 VAC 60HZ or 230 VAC 50HZ time is maintained with a real time clock chip located on the front of the clock allow for easy accurate time setting For system clock applications can be accomplished by connection to BCD digital data for instantaneous time updates can also be connected to power line timing inputs that provide hourly and hour corrections Impulse correction from the 6400 Master Clock is ideally suited for Time and System expansions A capacitor in each clock timekeeping for approximately 12 hours in the of power failure in the facility The Celestra 2000 be corrected with six different clock codes to suit any retrofit or new synchronized time system Visibility Chart the figure below for visibility information on Simplex 2000 digital clocks Note Visibility of amber green varies slightly from the values shown through series clock through series clock 10 2006 Correction square 2 1 8 backbox 2 gang plaster adapter ring by others Surface Wall Mounting figure below shows surface wall mounting on 2000 digital clocks clock requires a 6334 9802 Wall Mounting plate the appropriate wiring harness assembly Line Carrier deep backbox with plaster adapter Mounting Plate Mounting Plate with electronic correction receiver assemblies the 5001 9907 Steel City H3BD box and 5001 9906 Steel City 3GC ring Typical New Installation Wiring BCD correction wiring circuit requires 1 pair shielded 18 AWG or 1 pair level 5 24 AWG Time VAC Amplifier wiring requirements for the systems with line Each clock requires local 120 or 230 VAC Each line amplifier operates up to 50 Celestra digital clocks When less than 50 Celestra 2000 clocks are to be controlled the line amplifier may omitted Clock Models Red LED 120 VAC Green LED 120 VAC Amber LED 120 VAC Red LED 230 VAC Green LED 230 VAC Amber LED 230 VAC Red LED 120 VAC Green LED 120 VAC Amber LED 120 VAC Red LED 230 VAC Green LED 230 VAC Amber LED 230 VAC Blue LED 120 VAC 6334 9802 Wall Mounting Plate the 6334 9803 Assembly 120 VAC and the 6334 9804 Assembly 230 VAC can also be ordered for each clock 10 2006 Bi Directional Wall Mounting wall mounting is possible when using the 6334 9807 Wall Mounting Plate as shown below Bracket Interface square Plug Plate 1 1 2 deep extension to be used if 4 square is flush mounted Plate 10 2006 Bi Directional Ceiling Mounting ceiling mounting is possible when using the 6334 9806 Ceiling Mounting Plate and Interface Box as shown 1 1 2 deep ring to be if 4 square is flush mounted Plug square Plate Bracket Interface Plate 2006 Tyco Safety Products Westminster All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice Safety Products Westminster Westminster MA 01441 0001 USA 10 2006 the Simplex logo and Celestra are trademarks of Tyco International Services AG or its affiliates in the U S and or other countries