Simplex Elapsed Timer Control Panel

Timer Control Panel Simplex Elapsed Timer shall be designed to be used with any Simplex 3200 or 3300 digital clock It shall communicate with the clock using an RS485 connection and a RS485 protocol It shall have slots which will allow it to be mounted on a gang box The control panel shall have four button inputs and up to four plastic buttons Each button input shall have a red LED and a green LED it and each LED will activate or deactivate based on settings programmed into clock The signal sent by the control panel after a single button is pressed will activate a in the clock that causes the clock to perform one and only one of a list of This list of actions includes No Action Return to Time Display Briefly Display Date to Count Up and Hold Go to Count Up and Start Go to Countdown and Hold Go to and Start Reset Start Stop Shift Digits Flash Time Relay 1 Relay 2 and special purpose count up action for healthcare institutions This allows for the panel to command the clock to perform up to four actions as one action can be to each button and the product names listed in this material are marks and or registered marks Westminster MA 01441 use is strictly prohibited sheets may change without further notice