Simplex ES Fire Control Panels, Multiple Signal Fiber Optic Modems and Accessories for Panel and Remote Mounting

ULC CSFM Listed Approved with Simplex 4120 Network multiple 4120 network communications into a single fiber optic link to Multiplex audio signals analog and or digital AND communications into full duplex transmission a single fiber optic cable Communicate from a Fire Alarm Control Panel to a or provide 4120 Network communications Provide 4120 Network communication support for Ring and Star Topologies and their combinations by the function of a Physical Bridge without data rates optical transmitters provide transmission distances compared to copper over 20 miles 32 km may be possible with single mode fiber Designs are optimized for fiber type select models for mode fiber or models for multi mode fiber Analog Audio EAA feature Provides a decoded analog audio signal at the receiving for local use AND also provides the original encoded signal for connection to the next in the communications link With EAA total system distance is essentially unlimited combinations include Digital Audio Riser Analog Audio Riser 2 4120 Communications Digital Audio Riser Analog Audio Riser 2 RUI Unit Interface Communications Both Analog Audio Risers 4120 Network Both Analog Audio Risers RUI Communications Or any of the signals individually refer to application on pages 4 and 6 for more details mounted applications Standard two Slot module for 4100ES and 4100U Fire Control Panel or 4100ES 4100U MINIPLEX mounting A separate mounting plate is available for 4100 4120 mount or utility cabinet mounting Note 4120 Network Fiber Modems communicate in a Left Port Modem only communicates with a Modem Modem remote cabinet mounting Available in beige or red includes a Left Port Fiber space is provided for a Right Port Fiber ordered separately Compatible with Simplex control panel model Series 4100U 4010ES 4010 4007ES 4190 Series Workstation RUI and RUI compatible and legacy 4100 4100 4120 Control Panels Multiple Signal Fiber Optic Modems and for 4120 Network System Reference with Data Fiber Modems Continued Audio Expansion Modules Provide an interface to 25 VRMS and 70.7 VRMS levels from 4100 4120 fire alarm control panels Signal Fiber Optic Modems combine system communications signals and converts to fiber optic communications for transmission via a full duplex fiber optic cable connection that field wiring and increases transmission Communications can be sent individually or Information For additional application refer to 4120 Network Products and data sheet S4100 0056 and Fiber Optic Installation Instructions 579 831 This product has been approved by the California State Fire Marshal CSFM pursuant to 13144.1 of the California Health and Safety Code See CSFM Listing 7165 0026 251 allowable values and or conditions concerning material presented in this document It is to re examination revision and possible cancellation MEA NYC Approvals are not for this product category Additional listings may be applicable contact your local product supplier for the latest status Listings and approvals under Simplex Time Co are the property of Tyco Fire Protection Products 5 2018 Communications Fiber optic are accomplished by transmitting and over two different light wavelengths refer to on page 3 In order to complete a fiber optic complementary receive transmit modem pairs are The two required modem versions are identified Left Port Modems and Right Port Modems refer to list for model numbers One of each is required to the fiber optic communications link are designated for reference purposes only and not refer to actual physical locations Connections Each modem has field wiring for the Digital Audio Riser Analog Audio RUI and 4120 Network communications see page for terminal reference information Configurations are by on board switch and jumper selections operation is essentially transparent to the connected However Fiber Modems are entered into the programmer for current calculations and mounting Modem Terms Analog Audio For systems only using one Audio Riser At the Head End audio control panel Riser 1 analog audio signal is digitally encoded and via fiber optics to the receiving Fiber Modem the receiving modem the digital signal is decoded back analog for local use but when selected for Enhanced Audio EAA the digitized signal is also available to the DAR Digital Audio Riser terminals It can be wired to the next Fiber Modem in the link without requiring additional signal Note The next modem in the link must be in same cabinet or in a close nippled cabinet With EAA 1 distances are limited to system distances without Riser 1 signals can be passed through a maximum of 6 Fiber Modem pairs which is also the limit for using both Analog Audio Risers 1 and 2 DAR for digital audio are not available since those are used for EAA Refer to the diagram on 3 for more detail Modem Fiber Modems in a stand alone or in a 4120 Network loop have specific functions internal settings depending on whether they are for X Style 7 systems the first modem Head End or last modem Tail End or a modem between the first last For identification modem will be for Class B connected modems and for those located within a Class X fiber loop and not as the Head End or Tail End modem Modem For Class X communications a modem is the first fiber optic modem in a optic communications loop and is typically to the primary side of the communications in the head end cabinet A modem with wired to 4120 Network nodes or system between itself and the head end cabinet is considered to be the head end modem if it is the first optic modem in the communications path Side The Side of a wiring link has direct electrical connection to the head end terms are continued next page Product Selection see page 8 for product dimensions except as noted Network Fiber Modems for Internal Mounting in Fire Alarm Control Panels Not ULC Listed Type Single Mode Multi Mode Single Mode Multi Mode Fiber Modem Assembly Fiber Modem Assembly Fiber Modem Mounting Bracket not required 4100ES 4100U internal mounting order Fiber separately Expansion Module Assembly with mounting Expansion Module only mounts onto bracket of direct mounting onto a 4100ES 4100U expansion bay Modems are required to be ordered in pairs Left Port Modems communicate only to Right Port Fiber for internal mounting in a 4100 4120 Series fire alarm panel or in a compatible utility cabinet for internal mounting in a 4100 4120 Series fire alarm panel converts two analog audio input channels at VRMS or 70.7 VRMS to 10 VRMS for compatibility with Fiber Modem Audio Input requirements mounts next to Modem Cabinet and Related Modem Assemblies for Remote Mounting Type Single Mode Multi Mode Single Mode Multi Mode Cabinet with Fiber Modem see page 7 for details mount external to compatible panels where internal space is not available typical applications are for Fire Alarm Control Panels or 4100 4120 or cabinets without internal available space Single Mode Right Port Fiber Modem Assembly for Multi Mode Cabinet Mounting if required one maximum Expansion Module for Expansion Cabinet only is same as for Audio Expansion Modules above as required two maximum per cabinet two are for Class A Audio Riser c