Simplex EXI CPM-ECO

SPECIFICATION CPM ECO Number ARPCP01 ECO CPM ECO is the heart of the local perimeter system The CPM ECO generates a 300 exciter field which defines the door area When a transponder is detected in field CPM ECO will source 24V maglock s as well as a contact closure through the alarm capable of handling 1 AMP alarm is generated when a transponder enters controllers exciter field The receiver of the CPM ECO captures the receive and compares them to a template stored in microprocessor memory If the received from the transponder passes a series checks the CPM ECO will trigger into alarm the information is discarded as noise Equipment Cable whip antenna switch and cable AGEMS01 SPK Controller DataTerm Dataport Dedicated maglock drive signal output alarm condition Capability of driving SEA exciter for expanded or contoured patterns Fire alarm override and external alarm I O Override terminal triggered from a remote Door switch input facilitates nurse saver 200 mA regulated output Voltage Voltage aux Supply frequency Frequency cable length relay cable 22 Ga ECO VDC 500 mA VDC 200mA VDC 320 mA footnote KHz MHz x 24 x 7.6 cm x 9.5 x 3 inputs outputs Disable Switch release C Relay 2 with Elevator only local remote when shorted nurse saver alarm supervisory Input integration The CPM ECO will source 160 mA to the output when the 24V 320mA jumper on J1 When J2 is selected the CPM ECO will 320mA to the maglock however the 12 VDC 200mA will not be available J2 is selected Subject To Change Without Notice