Simplex EXI R2-SRA-E Exciter Antenna, SEA-E Exciter Antenna

PRODUCT SPECIFICATION SRA E Exciter Antenna Exciter Antenna Number AR2SE01 LPK Number ARPSB01 LPK SRA E and SEA exciter antennas are specifically designed for use inside an elevator car with the ID or the HALO elevator system These antennas are standard SRA and SEA antennas with a protective housing which facilitates mounting on the wall an elevator car In special applications antennas may be used as a surface mount solution for doorways with the Roampak ECO or ID or the Controller where a suitable hidden location for an SEA antenna cannot be found The SRA E and exciter antennas come complete with a 25 foot RG58 coaxial cable terminated with a BNC for the SRA E and an F Type connector for the SEA E R2 SRA E exciter antenna is a ferrite rod antenna tuned to 307KHz It is fed a regulated 307KHZ from the HALO controller The SEA E antenna is used in conjunction with the CPM ID and the and is tuned to 300 KHz and fed a similar signal from these units These exciter antennas create electro magnetic exciter field which activates the patient transponder upon entry The exciter field patterns and size are dependent on the environment and can be adjusted from a few feet to 20 feet more in free space Equipment Pak HALO SR2C01 ID ECO SRPE01 BNC coaxial connection R2 SRA E F type coaxial connections SEA E Protective casing Pre tuned at manufacture no tuning required Ruggedized protective casing foot pre terminated interconnect cable R2 SRA E supplied khZ x 4 x 2.5 x 10.5 x 6.5 cm 25 feet SEA E supplied x 4 x 2.5 x 10.5 x 6.5 cm 25 feet Subject To Change Without Notice