Simplex EXI RS-SRA Antenna, SEA Exciter Antenna

SPECIFICATION SRA Exciter Antenna Exciter Antenna Number AR2SE01 0PK Number ARPSE01 IPK R2 SRA exciter antenna is a ferrite rod antenna tuned to 307KHz It is fed a regulated 307KHZ signal the HALO controller The SEA exciter antenna is used in conjunction with the CPM ID and the and is tuned to 300 KHz and fed a similar signal from these units These exciter antennas create electro magnetic exciter field which activates the patient transponder upon entry The exciter field patterns and size are dependent on the environment and can be adjusted from a few feet to 20 feet more in free space exciter antenna is typically mounted above the drop ceiling at a doorway providing a protective exciter around the doorway Two antennas may be used per CPM or Controller to provide coverage for exits to 20 feet wide The SRA may also be dropped down a drywall cavity between the steel studs placed in adjacent closet or fastened under the floor of the egress point The SRA and SEA exciter antennas come with a 25 foot RG58 coaxial cable terminated with a BNC connector for the SRA and an F Type for the SEA Equipment Pak HALO SR2C01 ID ECO SRPE01 BNC Coaxial connection R2 SRA F type coaxial connections SEA Pre Tuned at manufacture no tuning Easily concealed above ceiling tiles or foot pre terminated interconnect cable wall board Protective casing R2 SRA Antenna khZ x 1.5 x 1.5 x 3.8 x 3.8 cm 25 feet supplied SEA Antenna supplied x 1.5 x 1.5 x 3.8 x 3.8 cm 25 feet Subject To Change Without Notice