Simplex Fire Alarm Network Products; AUTOCALL FireGraph Colorgraphics System Migration to Simplex TrueSite Workstation Network Annunciation Platform

DISCONTINUED FOR REFERENCE ONLY Alarm Network Products FireGraph Colorgraphics System Migration to TrueSite Workstation Network Annunciation Platform Listed FM Approved AUTOCALL FireGraph Colorgraphics to Simplex TrueSite Workstation operation Use existing FireGraph system information and a new wizard to update to TrueSite Workstation TrueSite Workstation version 3.01 or higher Make subsequent system modifications using TrueSite programming tools individual panel are made with existing TFX tools TrueSite Workstations support multiple network loops connection to both the existing TFXnet network to up to six 6 new Simplex fire alarm networks System migration to Simplex networked panels can be while the existing TFX panels are still in Existing multiple FireGraph systems can each be with TrueSite Workstations Workstation feature summary TrueSite Workstations can provide Alarm Silence Reset and Manual Evacuation over the TFXnet access level and password controlled TrueSite Workstations support multiple monitors and are as desktop rack mount or as the TrueSite Commander for 4100ES panel mount or reduced all in one desktop mount TrueSite Workstation servers support Remote Client using TCP IP Ethernet connections workstation features of Network Topology Diagnostics Test Mode and Point Simulate are not for TFXnet network connected TFX panels Workstation TFXnet connection options To a local existing TFX panel located within the same modified with a revised interface module To an existing TNI 562 interface assembly modified a revised interface module To a TFXnet interface hosted in a 4100ES or 4100U located within the same room Workstations support the following related operations Screens can contain both TFX points and Simplex points the same screen with support for FireGraph icons TrueSite Workstation commands for and are used to implement the TFX commands of and A TrueSite Workstation can be the Network Supervisor the TFXnet network A TFXnet Editor is part of the TrueSite Workstation to maintain TFXnet point information and how TFXnet points appear and how they are This product was not CSFM or ULC listed as of document revision date Additional listings be applicable contact your local Simplex product supplier for the latest status Listings approvals under Simplex Time Recorder Co are the property of Tyco Fire Protection next TFXnet node TFX panel TFX Simplex fire network TrueSite Workstation Network with TrueSite Workstation Continued front panel features are supported Using Terminal Emulation Mode the TrueSite allows direct connection to an individual panel to query detailed status Commands are entered using a keyboard and the is presented on the terminal emulation of the TrueSite Workstation Only one TFX panel is accessed at a time if multiple Workstations are connected to the same network additional connections will be disabled networks contain peer to peer interconnected panels and many also use FireGraph colorgraphics for network annunciation and control As part of migration to the newer generation features with Simplex 4100ES panels FireGraph can be updated to the platform of the Simplex Workstation 11 2012 Description Continued TrueSite Workstations as Network nodes on TFXnet Network in addition to their extensive feature the TrueSite Workstation can also connect to up to six Simplex Fire Alarm Network loops This feature in transitioning the site to being updated to all based fire alarm control panels The TrueSite Commander supports up to two 2 Simplex Fire Network loops Client Support Additionally the TrueSite server application supports Remote Client TCP IP Ethernet connections allowing additional based locations needing access to that Multiple FireGraph Systems existing FireGraph system can be replaced a TrueSite Workstation The process involves one replacement and then duplicating it using TrueSite Workstation file procedures TFXnet Connection Options systems connect into the TFXnet using RS 232 communications to a TLI 530 module mounted either in a TFX panel or in a TNI 562 Interface Assembly TFXnet Connection Options Continued upgrading to a TrueSite Workstation the TLI 530 module is replaced with either a or 4190 6019 module depending on the version in use see below for application details the existing related modules to be retained Connection Option A 4100ES or 4100U alarm panel located within the same room and within ft 3 m of the TrueSite Workstation can be used to a dedicated 4100 6068 TFXnet Network Interface that provides the same interface module as the TFXnet Interface Module If the panel is a on the TFXnet Network using a 4100 6068 a second 4100 6068 Interface is required within panel if adequate space two adjacent module blocks available Requirements Remain the Same In each the TrueSite Workstation connects to the network module using RS 232 communications and the limit remains the same as for the FireGraph system 10 ft 3 m maximum When connecting into an existing panel or TNI 562 Interface Assembly the replacement interface module requires the same voltage and as the existing TLI 530 module FireGraph to TrueSite Workstation Conversion Selection Reference Refer to data sheet S4190 0016 for the TrueSite Workstation and to data sheet S4190 0020 for the TrueSite Incident for hardware selection information and additional information Refer to page 4 for additional reference documents Modules for Connection to Existing TFX Products TrueSite Workstation Aftermarket Hardware Addition Identifier required when selecting TFXnet Software models below Software Compatibility Version 1.02 to Version 2.36 Version 2.44 to Version 3.2 Equipment for Connection Module mounted in a 4100ES or 4100U Fire Alarm Control Panel Workstation TFXnet Network Interface module select when TFXnet RS 232 connection is to an existing TNI 562 Interface Assembly or to existing TFX panel requires selection of 4190 8901 above Network Interface Connection to a 4100ES or 4100U Fire Alarm Control Panel provides the interface of the 4190 6019 per above the 4100ES panel must be mounted within 10 ft 3 m of the TrueSite refer to data sheet S4100 0054 for additional details Conversion Programming Reference to TrueSite Workstation data sheets for additional options and information select Items items per requirements quantity of items required requires selection 4190 8122 TrueSite Workstation Programming One FireGraph screen upgrade to TrueSite Workstation screen format 25 Custom Action Messages 25 Travel Screen Keys selective zooming 25 Status Icons 25 Control Functions On Off Bypass etc 10 Coverage Zones order quantity as required 11 2012 Installation Reference next TFXnet node TFX TFX a 4190 6018 or 4190 6019 Interface Module replacing existing TFX TLI 530 module next Simplex fire network node B C K L T U E F N O W X 0 H I Q R Z Alarm Priority 2 Alarm WARNINGS Silenced Power Alarm 2 or Warning Condition indicator flashing Tone On to Acknowledge View Events ACK located under flashing indicator operation until all events are acknowledged tone will silence to Silence Building Signals Alarm Silence to Reset System