Simplex Fire Suppression System Abort Switches and Releasing Appliance Circuit (RAC) Maintenance Switches; S2080-0010

ULC CSFM Listed NYC Acceptance System Peripherals Fire Suppression System Abort Switches and Releasing Circuit RAC Maintenance Switches switches provide a manual Fire Suppression release abort request Pushbutton momentary switch is mounted on a steel single gang plate A protruding collar protects the switch from contact collar is removable if required Available flush or surface mount Flush mounting requires standard single gang box Surface mounting includes a red mounting box Models are available with internal 1.2 k resistor for limited operation switches provide a secure and visible means for servicing Fire Suppression Releasing Appliance Circuits RACs Maintained position keyswitch with key removable in the normal position Disabled position opens connection to output circuit places a 16.2 k resistor across the input circuit initiate a supervisory condition at the host panel Models with indicator lamp use a bright incandescent with red lens powered from separate 24 VDC Available for flush or surface mount Flush mounting requires a standard double gang box models with lamp or a standard single gang box models without lamp Surface mount models includes a red mounting box Models with lamp provided with a double gang steel plate Models without lamp provided a single gang stainless steel plate listed to Standard 864 systems require maintenance disconnect switches often require abort switches These abort and switches are clearly labeled and combine easy with rugged construction for high integrity SUPPRESSION DISABLE Switches with and without Disconnect Lamp SUPPRESSION ABORT AND HOLD Abort Switch Refer to page 2 for specific product listings NOTE MEA is not applicable to Switches FM is not applicable to Abort Switches As indicated on page 2 these products have been approved by the California State Fire CSFM pursuant to Section 13144.1 of the California Health and Safety Code See Listing 7300 0026 313 for allowable values and or conditions concerning material in this document Abort switches are accepted for use City of New York of Buildings MEA35 93E Maintenance switches were not approved by FM as document revision date Additional listings may be applicable contact your local Simplex supplier for the latest status Listings and approvals under Simplex Time Recorder are the property of Tyco Fire Protection Products 3 2017 Product Selection see page 3 for specifications Switches Flush mount Surface mount includes Switches for 4004R Series Suppression Release Panel Current Limited Operation size includes 3 position contact block housing one contact block installed Status CSFM listed NYC mounting box Flush mount Surface mount includes mounting box Status CSFM listed NYC size includes 1.2 k 1W resistor for current operation and 3 position contact block housing with contact block installed For ULC listed abort switches refer to datasheet S2080 0011 Switches with Disconnect Indicator Lamp Status mounting box ULC CSFM size includes 3 position contact block housing 2 contact blocks installed disabled position opens to output and places a 16.2 k resistor across the circuit resistor is removable if required for retrofit Flush mount Surface mount includes Switches without Disconnect Indicator Lamp size includes 3 position contact block housing 1 contact block installed disabled position opens to output and places a 16.2 k resistor across the circuit resistor is removable if required for retrofit Flush mount Surface mount includes for Field Installation ULC CSFM mounting box Status Additional Contact Block for Abort or Maintenance Switch 1 Form C contact UL recognized component for use these switches listings and approvals are not applicable Abort Switch Installation Reference 3 2017 2080 9059 and 2080 9060 Maintenance Switch Installation Reference 2080 9069 and 2080 9070 Maintenance Switch Installation Reference 3 2017 Specifications control Silver contacts 1 normally open 1 normally closed rated 2 A resistive 30 VDC control Silver contacts 1 normally open 1 normally closed rated 2 A resistive 30 VDC Ratings Switch One Contact block Silver contacts 1 N O 1 N C rated 2 A resistive 30 VDC Switch Control Block all models Switch Lamp Block models 2080 and 2080 9060 Switch Indicator models 2080 9059 and Connections Switch Switch with Current Limited 2 W incandescent bulb 24 to 30 VDC typical 83 mA 24 VDC requires 24 VDC blocks for in out wiring 18 to 14 AWG wire 0.82 mm2 to 2.08 mm2 blocks for first wire connection 18 to 14 AWG wire 0.82 mm2 to 2.08 mm2 AWG wire lead for second wire connection AWG 0.82 mm2 color coded wire leads for suppression circuit terminal blocks for wiring 18 to 14 AWG wire 0.82 mm2 to 2.08 mm2 Installation Instructions Switch Information Ratings Range Range F to 120 F 0 C to 49 C to 93 at 90 32 C SIMPLEX and the product names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm Code registered trademarks of the National Fire Protection Association NFPA 2016 Tyco Fire Protection Products All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice Fire Protection Products Westminster MA 01441 0001 USA 3 2017