Simplex Grinnell Fire Protection Multitone and Multitione Strobe Electronic Appliances

MULTITONE AND MULTITONE STROBE APPLIANCES and MT4 Series and MT4 Series and MT4 Series and MT4 Series and MT4 Series Available Available Available Eight Available Available Sounds Sounds Sounds Sounds Sounds Power Power Power Power Low Power and and and and and Inrush Inrush Inrush Inrush Inrush Strobe Models Strobe Models Strobe Models MT Strobe Models Strobe Models with 15 with 15 with 15 with 15 with 15 30 and 75 30 and 75 30 and 75 30 and 75 30 and 75 Ratings for Ratings for Ratings for Ratings for Ratings for or or or or or Input Input Input Input Input Models Have No Models Have No Models Have No Models Have No MT Models Have No Mounting Mounting Mounting Mounting Mounting Information Information Information Information Information MT and MT4 Multitone and MT Electronic Appliances offer a of eight 8 nationally and internationally alerting sounds The MT and MT4 are switch selective for Horn Bell March Time Horn Siren Code 3 Horn Code 3 Tone Slow Whoop Hi Lo Tone Horn and Code 3 Tone incorporate temporal pattern recommended by NFPA for standard emergency evacuation With the multitone strobe electronic one alarm appliance meets most your signaling requirements Synchronized versions are also available cost installation is via standard electri boxes 4 sq or 2 gang for easy retrofit additional trim plate is required for flush Options include indoor and outdoor mounts The MT series features a de appearance that eliminates all visible hardware Compliance Compliance Compliance Compliance Compliance MT series appliances are available with which are designed for ADA compli with maximum performance reliability cost effectiveness while meeting or ex the latest requirements of NFPA 72 National Fire Alarm Code ANSI 117.1 American National Standard For Acces and Usable Buildings and Facilities and Standard 1971 Signaling Devices for the Impaired except for the WM model is UL 1638 only The LSM and SLM when properly specified and installed accordance with NFPA ANSI Standards or exceed the illumination which results the ADA specified strobe intensity of 75 at 50 feet MT and MT4 model has two user se sound output levels Standard dBA and dBA The MT and MT4 multitone elec appliances operate with 24VDC and are for use with either filtered or unfil full wave rectified input voltage Sepa input terminals are available Multitone electronic appliances provide shunt to enable both tone and strobe to oper simultaneously from a single input multitone electronic appliances and the WM multitone strobe appliance UL listed for indoor and outdoor use All multitone strobe appliances and the sync are UL listed for indoor use only strobes use a Xenon flashtube with state circuitry enclosed in a rugged lens to provide maximum reliability for visible signaling Strobe options in LS MS IS SL and WM series which listed at 15 30 75 15 and 117 candela respectively The LSM and SLM mul appliances are listed at 15 can and meet 75 candela intensity on axis ADA guidelines with low current draw MT and MT4 models have in out wiring that accept two 12 to 18 American Gauge AWG wires at each screw termi Inputs are polarized for compatibility with reverse polarity type supervision Approvals Approvals Approvals Approvals Approvals All MT and MT4 models are UL Standard for Audible Signal Appliances The SM and DSM sync modules and all appliances except the model are UL 1971 Listed Signaling for the Hearing Impaired The WM multitone strobe appliance is UL Listed for Visual Signaling Appliances Private Mode Emergency and General Signaling CSFM No 7125 0785 118 OSHA 29 part 1910 approvals on all models 1 of 6 1 dBA and Current Ratings for MT4 115 R Multitone Electronic Appliance Tone Description Horn Continuous Hz modulated 0.07 sec ON Repeat 0.25 sec ON 0.25 sec OFF Repeat ANSI S3.41 temporal pattern Hz ANSI S3.41 temporal pattern Hz Sweep 4.0sec ON 0.5sec Hz Sweep 1.0 sec ON Repeat Hz 0.25 sec ON Alternate Time Horn Tone RH Whoop 115VAC multitone electronic appliances are UL Standard 464 115VAC models are UL Listed for indoor outdoor use with a temperature range of 31oF to 150oF 35oC to 66oC and a maximum humidity of Average Current dBA 10 feet dBA 10 Feet Per UL for Tables 1,2 and 3 Anechoic dBA is measured on axis in non reflective free field test room fast meter response For peak measured with peak meter re add 5dBA to typical anechoic shown Reverberant dBA is a minimum UL based on sound power mea in a reverberant test room Multitone electronic appliances with without strobes have a brief in current during start up See Instructions Add 25 more input current than in tables 2 and 3 when operat the unit at maximum input voltage 2 dBA Current Ratings for MT 12 24 R Multitone Appliance Tone Current at 10 Feet Nominal Voltage Reverberant dBA 10 Feet per UL 464 Minimum Nominal Time Horn Tone Whoop The multitone electronic appliances are UL Standard 464 They are listed for indoor outdoor with the backboxes specified in these instructions Tone 3 dBA Current Ratings for Audible Portion of LSM MS IS WM SL SLM Multitone Strobe Appliances Current dBA 10 Feet Reverberant dBA 10 Feet per UL 464 Nominal Voltage Minimum Nominal Time Horn Tone Whoop CAUTION CAUTION CAUTION This setting is acceptable only for general signaling non fire alarm use Use the dBA setting with this tone or use a differ CAUTION CAUTION tone for public mode fire alarm service The WM multitone strobe electronic appliance is UL 1638 Listed and UL Standard 464 for Audible Signal Appliances It is UL Listed for OUT use from 31oF to 150oF 35oC to 66oC and maximum humidity of 95 RH All other MT multitone strobe electronic appliances are 1971 Listed and UL Standard 464 for INDOOR use All multitone strobe electronic appliances including the WM are UL Listed for INDOOR use with a temperature range of 32oF to 120oF 0oC 49oC and maximum humidity of 85 RH 2 of 6 4 Strobe Current Requirements For Multitone Strobe Appliances LS LSM MS IS WM SL SLM Inrush Current Amps Average C