Simplex How to Adjust the 2001-3001 Battery Charger

Goal How to Adjust the 2001 3001 Battery Charger 2001 2001 3001 Battery Charger 634 659 Sealed Lead Acid Battery Nickel Cadmium Battery Wet Cell Battery Battery charger trouble High Rate Lamp ON Need to adjust trickle charge rate Cannot charge battery Replaced Battery Charger The 2001 3001 Battery Charger was designed to work with Lead Acid Wet Cell and Nickel Cadmium only not the new Simplex sealed Lead Acid batteries must be adjusted for High Rate Cutoff and Float Voltage Trickle Charge High Rate Cutoff is adjusted on the 565 269 Charger Rate Monitor Card Connect 26.5VDC to pin 3 10 Connect 0V to pin 5 Connect Meter DCV across R9 Adjust R10 for 0V on the meter Float Voltage is adjusted on the 634 659 Charger The charger should be in the standby application Voltage Adjust R1 between 27 and 27.6 volts 2001 3001 was not made for the Sealed Lead Acid Batteries No parts a available for the 2001 3001 This power supply should be replaced with the 2001 3002 634 174 and it is designed for Sealed Acid Batteries