Simplex JAL(G) Series Analog Clock

JAL G Series Analog Clock secondary clock shall be a Simplex JAL G Series wireless clock It shall be an analog clock with a hour hand a black minute hand and a red second hand The clock will be capable of receiving then re transmitting a signal from any other Simplex device that transmits data using Simplex protocol The clock shall use frequency hopping technology to receive time data on a range of either 915 MHz or 2.4GHz depending on the type of transmitter that was The clock shall also be able to retransmit time data on the same frequencies either 915 or 2.4GHz depending on the type of transmitter that was ordered The frequency hopping shall allow the clock to transmit time data without causing interference to other wireless that may be transmitting at the same time The clock shall be designed to be used with the JMA Series Master Clock with the transmitter option installed or the Simplex Repeater Time shall be transmitted and received by the clock via Simplex wireless communication protocol clock shall also be designed to receive and retransmit time data to Simplex JBL G Series clocks other JAL G Series clocks Upon receipt of the wireless signal the clock will immediately self The clock transmitter shall be able to successfully transmit data over a line of sight distance of up to 1320 feet 402 meters The clock shall include an executable method automatic hand calibration as well as a diagnostic function that allows the user to view the quality the signal the last time the clock received a correction signal the performance and results of a test and a comprehensive analysis of the entire clock movement These diagnostic functions be enabled by pressing a button on the clock movement The clock shall require fewer than five minutes to perform a correction of the hand positions The battery powered model of the clock be capable of receiving a signal every two 2 or four 4 hours The 24V 115VAC or 230VAC of the clock shall be capable of receiving a signal every minute The clock shall have a smooth ABS case which can be attached either directly to the wall or to a standard sized gang box round versions of the case shall be designed such that they will fit within Simplex aluminum round housing The clock case shall be produced in round cases with diameters of 12 or 16 inches The is to be made of durable polystyrene material The crystal is to be made of shatterproof side polycarbonate The clock shall be FCC compliant in accordance with part 15 Section 15,247 G is used for 2.4GHz models in which case the model code is JALG In 900MHz models the model name is JAL G is used for 2.4GHz models in which case the model code is JBLG In 900MHz models the model name is JBL and the product names listed in this material are marks and or registered marks Westminster MA 01441 U S A use is strictly prohibited sheets may change without further notice SJAL 2001