Simplex JMA 3000 Series Master Clock

3000 Series Master Clock Master Clock shall be the Simplex JMA 3000 Series The master clock shall have an LED display as well a backlit two row by twenty character LCD display It shall also have a 16 button rubber tactile keypad to the display that shall allow a user to program the master clock The master clock shall have up to pre programmed NTP servers which will be accessible for modification over a network interface The clock will be capable of receiving signals from existing master clocks via RS485 59 minute 58 minute correction National Time and Rauland transmission protocol or Dukane transmission The master clock when a wireless transmitter is attached shall be capable of translating a wired signal into Simplex wireless signal and then broadcasting the wireless signal to Simplex and JBL G secondary clocks The master clock shall contain two clock circuits that have the to run synchronous wire systems such as 59 minute correction 58 minute correction National or a once a day pulse for intercom systems The master clock shall be capable of interfacing the JAM Series analog clock via the Converter Box It shall also be capable of interfacing with the JRM analog clock and any of Simplex 3200 or 3300 series digital clocks via RS485 communication The master clock shall be powered by 115VAC 60 Hz or 230VAC 50 Hz The master clock will be of acting as a repeater for another master clock The master clock shall contain the necessary and programs so that a typical web browser like Internet Explorer can access the clock over a area network When accessed this way the clock settings can be modified through a graphic user The interface shall allow the user to program all of the display features for secondary clocks the settings of the master clock and any system setting that the master clock has 3000 upgrade options Transmitter The Master Clock shall be capable of transmitting data to the JAL G wireless analog and the JBL G wireless digital clock The master clock shall also be capable of acting as a repeater receiving a wired or wireless signal from another master clock The Master clock shall include either a MHz transmitter or a 2.4GHz transmitter Both types of transmitter hardware shall use frequency technology The master clock shall have the option of having a GPS receiver board and antenna port built into unit This hardware and software will allow the master clock to receive UTC data from GPS satellites Server The master clock shall have the capability to distribute time via SNTP protocol over a network This means that IP devices on the network will be able to acquire SNTP data from the clock if directed to do so zones The master clock shall be capable of utilizing four or eight zones that can activate or bells lights etc A user shall be able to program the zones either through the 16 button rubber keypad and LCD display or through the Web interface for Digital Clocks The master clock shall be able to set the countdown time between events make the digital clocks count down G is used for 2.4GHz models in which case the model code is JALG In 900MHz models the model name is JAL G is used for 2.4GHz models in which case the model code is JBLG In 900MHz models the model name is JBL and the product names listed in this material are marks and or registered marks Westminster MA 01441 U S A use is strictly prohibited sheets may change without further notice