Simplex MX Technology Addressable Devices; Loop Powered General Signaling Sounders for Indoor and Outdoor Applications

Listed Technology Addressable Devices Loop Powered General Signaling Sounders for and Outdoor Applications Technology addressable sounder features MX loop powered with internal isolator separate is not required Listed to UL 464 for general signaling operation Available for indoor mounting in red or white and for mounting in red and outdoor sounders include a matching mount box with tamper resistant latch release is supplied Selectable output volume of 90 dB or 103 dB Sounders on the same MX Loop are synchronized Output sound patterns are selectable from the MX Module to be March Time 60 bpm Slow Time 20 bpm or Continuous Address and sounder selections are easily programmed the MX 850EMT Engineering Management Tool For use with Simplex 4100ES and 4010ES Series fire control panels equipped with an MX Loop Refer to data sheet S4100 0059 for MX Loop Module Refer to specifications section for wiring requirements Loop Powered Sounders use MX Technology for control and power Indoor models are in red or white The outdoor model is in red these loop powered sounders supervision is using MX loop communications and then can be activated with the tone selection controlled the MX Loop Module Listings and approvals under Simplex Time Recorder Co are the property of Tyco Fire Products Indoor Red Sounder Indoor White Sounder Outdoor Red Sounder 9 2018 and the product names listed Description White Sounder with box mm W x 108 mm H x 96 mm D x 4.25 x 3.78 Outdoor Sounder with box mm W x 110 mm H x 105 mm D x 4.33 x 4.13 MX Engineering Management Tool ref MX Model 850EMT installation diagnostic and programming tool MX Ancillary Program Lead Spare MX Service Tool Accessory Kit Loop Supervisory Current mA Low Level and Current Output for general signaling 90 dB 3 m 10 ft 103 dB 3 m 10 ft 3.4 mA mA Connections Wiring Requirements Models Model Instructions Temperature 0 C to 49 C 32 F to 120 F Temperature 25 C to 70 C 13 F to 158 F up to 95 RH non condensing Rating EN60529 Temperature 40 C to 66 C 40 F to 151 F Temperature 25 C to 70 C 13 F to 158 F Rating blocks for wire size 0.5 to 2.5 mm2 20 to 14 AWG provide segregation between fire alarm devices and general signaling sounders into and out of these sounders must be connected through the following MX Sensor Bases Loop Powered Sounder Base Loop Powered Sounder Beacon Base 4 Continuity Base the 4090 5206 Line Isolator to data sheet S4098 0051 for MX Loop Sensor Base details and data sheet for Line Isolator details and the product names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm and Signaling are registered trademarks of the National Fire Protection Association NFPA 2018 Johnson Controls All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice MA 01441 0001 USA 9 2018