Simplex MX Technology Addressable Devices; Model 4090-5250 Loop Powered Multiple I O Module with Three Inputs and Two Outputs

Listed Technology Addressable Devices Model 4090 5250 Loop Powered Multiple I O with Three Inputs and Two Outputs Technology addressable multiple module features MX loop powered separate voltage is not required Three supervised Class B independent inputs for either N O or N C contacts that can be selected as Style B for multiple contacts short is an active input open is a or as Style C for a single current limited short or open is a trouble Outputs are two separate Form C dry volt free relay contacts rated 2 A 24 VDC Relays are monitored for a condition causing a fault and outputs are individually monitored and by system programming Address is easily programmed with the MX 850EMT Management Tool Status LED illuminates when any of the three inputs is in the inactive state LED will blink to indicate from the MX Control Module blink on poll is when programming the control module Mounts in D800 IP55 housing cover allows viewing module status LED UL listed to Standard 864 device Programming uses three sub points for the inputs and for the outputs five total For use with Simplex 4100ES and 4010ES Series fire control panels equipped with an MX Loop Refer to data sheet S4100 0059 for MX Loop Module Also compatible with DIN Rail mounting not UL Listings and approvals under Simplex Time Recorder Co are the property of Tyco Fire Products Multiple I O Module Multiple I O Module mounted in D800 housing with cover removed Multiple I O Modules use MX Technology provide an addressable input output module with monitoring of three inputs and control of two to satisfy a variety of applications Modules are addressable and communicate with an MX Module located in the host fire alarm control panel include monitoring fire contacts such as system control ventilation control fire door etc Input are independent and the Form C output are dry volt free suitable for a variety of 3 2015 Product Selection Multiple I O Module 3 Class B inputs and 2 Form C relay outputs D800 Ancillary housing IP55 rated provides viewing port for status LED DIN Rail Mounting Kit NOTE Not UL listed mm W x 72 mm H x 18 mm D 11 x 2 27 x 23 mm W x 120 mm H x 70 mm D x 4 x 2 MX Engineering Management Tool ref MX Model 850EMT sensor installation diagnostic and programming tool MX Ancillary Program Lead Spare MX Service Tool Accessory Kit Package of 10 spare pins for ancillary programming lead Specifications Loop Current Contact Ratings Resistance to Monitored mA in standby mA in alarm A 24 VDC maximum Options Connections Temperature Instructions or multiple input N O contact Style B with open circuit trouble fault and circuit input active requires 300 end of line resistor or N C single input Style C contact with open circuit or short circuit trouble fault and limited input input active 300 end of line resistor and 150 resistor wired in series with contact common refer to installation instructions for details blocks for wire size 0.5 to 2.5 mm2 20 to 14 AWG F to 120 F 0 C to 49 C to 93 RH non condensing SIMPLEX and the product names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited 2015 Tyco Fire Protection Products All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice Fire Protection Products Westminster MA 01441 0001 USA 3 2015