Simplex Peavey CEQ 280a Computer Controlled, MIDI Graphic Equalizer

S P E C I F I C A T I O N S 280a Graphic Response 1 dB 5 Hz to 50 kHz 0.005 20 Hz to 20 kHz EQ Flat limited 10 Hz to 80 kHz Noise EQ Flat 94 dBu ref 0.775V 20 Hz to 20 kHz Range EQ Flat 110 dB 20 Hz to 20 kHz balanced XLR or 1 4 TRS Impedance 10 K ohms Common Mode Ratio 40 dB Input Level dBu 14V RMS ref 0.775V balanced XLR or 1 4 TRS Impedance ohms Output Level dBu 7V Hi Z load ref 0.775V dBm 600 ohm load 1 mW Frequencies Hz to 16 kHz on ISO centers Control Range 12 dB Boost Cut 12 dB in 12 dB range setting 6 dB in 6 dB range setting Band Filter Q x 2 line Liquid Crystal Consumption 12 W 60 Hz 120 V AC 12 W 50 60 Hz 230 V AC 28 band graphic equalizer Constant EQ filters on 1 3 octave centers Real time analyzer Automatic room equalization Built in pink noise Easy to read 40 character x 2 line Crystal Display Nonvolatile storage of 128 EQ curves Nondestructive EQ curve addition EQ curve compare 12 dB in 1 dB 6 dB in 0.5 dB steps Combination XLR 1 4 phone input Electronically balanced inputs and Software security lock Feedback finder MIDI controllable MIDI compatible with the original 28 CEQ 28R Relay front panel and power off Switchable 40 Hz subsonic filter Single I U standard rack space Internal power supply CEQ 280a is a computer MIDI graphic equalizer to meet the needs of sound installations The circuit assures reliable long term and smooth trouble free ACOUSTICS ENGINEERING SPECIFICATIONS graphic equalizer shall have electronically balanced XLR and 1 4 phone type connectors for input and output The unit have a 40 character x 2 line LCD The unit shall have front panel buttons to access the EQ RTA Bypass Global and Recall features In addition it shall have six buttons for navigating through the various parameters and screens The unit shall be packaged in a rugged steel chassis 19 wide by 13 4 high by 115 8 deep The unit shall have a response of 5 Hz to 50 kHz 1 dB The unit shall have a THD not to exceed 0.005 The unit shall have an noise value less than 94 dBu The unit shall have a dynamic range greater that 110 dB The unit shall have an input greater than 10 K ohms The unit shall have a rejection ratio greater than 40 dB The unit shall have a maximum level of 25 dBu The unit shall have an output impedance of 100 ohms The unit shall have a maximum output level of dBu Hi Z load 18 dBm 600 ohm load The unit filter frequencies shall be 32 Hz to 16 kHz on ISO centers The unit have maximum boost cut of 12 dB in 12 dB setting and 6 dB in 6 dB setting The unit shall have an EQ band filter Q of 4.77 The unit shall be called the Peavey Architectural Acoustics Division model CEQ 280a WARRANTY Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free defects in material and workmanship If within one 1 year from date of purchase a properly installed product proves to defective and Peavey is notified Peavey will repair or replace it at no charge Note Batteries and patch cords not purchaser means the customer for whom the product is originally installed Damage resulting from improper installation interconnection of a unit or system of another manufacturer accident or use neglect or any other cause not arising from defects in material and workmanship is not covered by this The warranty is valid only as to products purchased and installed in the United States and Canada THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES EXPRESSED OR IMPLIED INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE UNDER NO WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS LOST SAVINGS INCIDENTAL DAMAGES OR DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT EVEN IF PEAVEY BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE THIS LIMITED WARRANTY IS THE ONLY WARRANTY ON THIS PRODUCT AND NO OTHER STATEMENT REPRESENTATION WARRANTY OR BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY Peavey liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action is to the actual damages up to the greater of Five Hundred Dollars 500 or an amount equal to the purchase price of product that caused the damage or that is the subject of or is directly related to the cause of action This limitation of will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused Peavey negligence For information on service under this warranty call a Peavey customer service representative at 483 5376 ACOUSTICS and specifications subject to change without notice 8000383 Printed in U S A 6 96 Division of Peavey Electronics Corporation A Street Meridian MS 39301 U S A 601 483 5376 Fax 486 1154