Simplex Serial DACT ™ Installation Instructions

DACT Alarm Communications Transmitter and Programming Instructions C Simplex Time Recorder Co 2000 All rights reserved Printed in United States of America in this document is subject to change without notice No part of this may be reproduced or transmitted in any form or by any means or mechanical for any purpose without the express written consent of Time Recorder Company and Warnings Reacceptance Test REACCEPTANCE TEST AFTER SOFTWARE CHANGES To proper system operation this product must be tested in accordance with Chapter 7 after any programming operation or change in site software Reacceptance testing is required after any change addition or of system components or after any modification repair or adjustment to hardware or wiring components circuits system operations or software functions known to be by a change must be 100 tested In addition to ensure that other are not inadvertently affected at least 10 of initiating devices that not directly affected by the change up to a maximum of 50 devices must be tested and proper system operation verified the instructions in the installation operating and programming manuals instructions must be followed to avoid damage to the control panel and equipment Fire Alarm Control Panel FACP operation and depend upon proper installation NOT INSTALL ANY SIMPLEX PRODUCT THAT APPEARS Upon unpacking your Simplex product inspect the contents of the for shipping damage If damage is apparent immediately file a claim the carrier and notify Simplex HAZARD Disconnect electrical power when making any adjustments or repairs Servicing should be performed by qualified Representatives FREQUENCY ENERGY This equipment generates uses and can radio frequency energy and if not installed and used in accordance with instruction manual may cause interference to radio communications It has tested and found to comply with the limits for a Class A computing device to Subpart J of Part 15 of FCC Rules which are designed to provide protection against such interference when operated in a commercial Operation of this equipment in a residential area is likely to cause in which case the user at his own expense will be required to take measures may be required to correct the interference of Contents to Use this Publication xii Used xii Conventions xii Conventions xiii the Mouse xiii 1 Getting Started 1 1 this Chapter 1 1 and IC Regulatory Information 1 2 Requirements 1 2 Declaration of Conformity 1 2 Canada Declaration 1 3 Equipment Attachment Limitations for Canadian Users 1 3 to the Telephone Company 1 4 Requirements 1 4 Installation 1 4 Line Requirements 1 5 1 6 Requirements for 4020 4100 4120 Versions 1 6 Limitations 1 6 Indicators 1 6 2 Installing the SDACT 2 1 this Chapter 2 1 SDACT Installation 2 2 a 4020 0155 SDACT Kit 2 2 the FCC and or Industry Canada Label 2 2 the 4020 0155 SDACT into the System 2 3 SDACT Installation 2 4 a 4100 4120 0155 SDACT Kit 2 4 the FCC and or Industry Canada Label 2 4 the 4100 4120 0155 SDACT into the System 2 5 NPU SDACT Installation 2 6 a 4120 0155 NPU SDACT Kit 2 6 the FCC and or Industry Canada Label 2 7 the 4120 0155 NPU SDACT into the System 2 7 3 Using the SDACT Programmer 3 1 4010 Documentation 3 1 this Chapter 3 1 the Programmer Software 3 2 the Software Key 3 2 to Install the Programmer Software 3 2 the SDACT 3 4 Overview 3 4 to Start Programming the SDACT 3 8 to Import a PTF File 3 9 Configuration 3 10 the Local SDACT Points 3 14 Point Types 3 15 to Select or Deselect Points for the Central Station Report 3 16 to Select All Points 3 17 to Deselect all Points 3 18 to Select by Point Type 3 18 to Deselect by Point Type 3 21 the Job 3 23 to Create the Build File 3 23 the Job to the SDACT 3 24 to Select the Download Communications Port 3 24 to Download the Build File to the SDACT 3 24 Central Station Reports 3 26 to Print a Central Station Report 3 26 4 Maintenance 4 1 this Chapter 4 1 Procedures 4 2 Changes to an Existing SDACT Program 4 2 Backup Archive 4 12 to Archive Your Job 4 12