Simplex Synchronized Time Products; Double Dial Brackets for Simplex 6310 and 2310 Series Wall Clocks

Listed CSA Certified back to back installation of clocks for from two directions Capable of wall or ceiling mounting Perfect for use in Schools Airports and other transportation facilities Manufacturing facilities For use with Simplex semi flush wall clocks only provided separately brackets Are available for 12 305 mm and 15 381 mm analog clocks Have a matching matte black finish brackets Are available for 12 dial analog clocks Have a matching matte aluminum finish box and accessories Requires mounting box 2975 9024 ordered Blank filler plates are available for 12 round and square brackets for use where only one clock is Dial Brackets are for use in large open areas as schools transportation facilities and facilities where clocks must be visible a longer distance and at angles different from those with normal wall mounting These brackets allow round or two square Simplex analog clocks to be back to back and either wall or ceiling mounted end of hallway applications or other locations where one clock is visible optional blank filler plates are for the 12 round bracket and the 12 square Clock Bracket Mounting Note Round clock connect to their mounting plate using a 1 Pipe Thread threaded both ends and secured a locking screw A 2 long pipe nipple is supplied a close fit To increase this distance use a locally 1 diameter pipe threaded on both ends cut to desired length not supplied with Semi Flush Clocks Use of these Double Brackets requires semi flush mount Simplex analog that are furnished separately Time Products Double Dial Brackets for Simplex 6310 2310 Series Wall Clocks Double Dial Clock Bracket Double Dial Clock Bracket Selection Dial Bracket Round Round Square Dial Bracket includes mounting hardware kit some on site Mounting requires mounting box ordered separately Box and Double Dial Bracket Double Dial Mounting Box required Blank Filler Plate for 12 round clock Blank Filler Plate for 12 square clock 6 2009 Round Double Dial Bracket Dimension Reference square mm bracket 13 3 8 340 mm ref bracket 15 1 4 387 mm ref bracket 15 381 mm ref bracket 17 3 8 441 mm ref Square Double Dial Bracket Dimension Reference 127 mm 51 mm 76 mm mm Ref mm square 6 2009 Double Dial Bracket Mounting Reference Round Double Dial Bracket Reference Round Double Dial Bracket Reference minimum mm minimum mm minimum mm mm minimum mm mm Round Double Dial Bracket Outline are refaced to clock center lines Square Double Dial Bracket Reference Round Double Dial Bracket Outline are referenced to clock center lines Ceiling or Wall Mounting requires 2975 9024 Mounting Box ordered separately Mounting Box Reference minimum mm mm holes to double dial plate mm minimum mm mm 102 mm Square Double Dial Bracket Outline are referenced to clock center lines 6 2009 is a registered trademark of Tyco International Services GmbH and is used under license Simplex and the Simplex logo are trademarks of Tyco International Ltd and its and are used under license 2009 Tyco Safety Products Westminster All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice Safety Products Westminster Westminster MA 01441 0001 USA 6 2009