Simplex TD Series Heat Detectors

Listed Peripherals and Accessories Detectors Series Self Restoring Profile Design Neutral White Finish Octagon Mount Box with Trim Plate Mount low profile self restoring fixed temperature TD heat detectors fit onto any standard octagon box unit will protrude no more than 25.4 mm 1 below surface of the finishing ceiling when flush mounted bimetal disc is used as the heat sensing element An is initated when the surrounding air temperature the unit rated level When the air temperature below the rated level the detector will reset heat detector shall be a fixed temperature self type designed for low profile mounting The shall be constructed of neutral white fire resistant material Operation shall consist of the of a normally open contact to activate an initiating circuit When the air temperature falls below the rated temperature the contact will automatically to the normal position 21m2 225 ft2 4.6 m 15 ft centres m 7.5 ft from wall coverage and spacing figures given here are as a guide only Refer to the specific requirements in the ULC standards and in any other national and codes models Temperature self restoring heat 135 F 57 C Ideal for where the ambient is not expected to exceed F 38 C Temperature self restoring heat 200 F 94 C Ideal for where the ambient is expected to exceed F 38 C but not 150 F 66 C 2000 Simplex International Time Equipment Co Ltd 9 00 9 00 Skymark Avenue Mississauga Ontario L4W 5K5 and Representatives Throughout the World us on the world wide web at www simplexnet com specifications and other information shown were current as of printing and are subject to change without notice Printed in Canada