Simplex TrueAlarm Sensing, 4098-9757 QuickConnect2, TrueAlarm Photoelectric Sensor

ULC Listed FM CSFM MEA NYC Approved TrueAlarm Analog Sensing QuickConnect2 TrueAlarm Photoelectric Sensor 4098 9757 QuickConnect2 sensor design TrueAlarm photoelectric analog sensing and IDNet addressable communications combined into assembly Quick and easy connection to a 4098 9788 base ordered separately Operation for ceiling or wall mounting Operation for use with Simplex models 4007ES 4010 4100ES with IDNet 2 and IDNet 2 2 Modules 4100ES 4100U Fire Alarm Control Panels with Module 4100 3106 UL listed to Standard 268 sensors communicate to the panel to provide the following TrueAlert sensing operation features Smoke sensitivity that is accurately maintained at the level determined by the control panel 4007ES 4010ES and compatible 4100ES 4100U Series panels provide seven levels of sensitivity from to 3.7 ft of obscuration refer to page 2 for details 4010 Series control panels provide three levels of of 2.5 3.0 or 3.7 ft obscuration Sensitivity monitoring that satisfies NFPA 72 sensitivity requirements Automatic environmental compensation Automatic once per minute individual sensor check verifies sensor integrity Ability to display and print detailed sensor information plain English language Tracking of excessive dirt accumulation base provides stationary wiring and quick snap in sensor connections Mounting is on a 4 square 4 octagonal or single gang supplied separately 4098 9832 Adapter Plate is available for retrofit and mounting methods refer to page 2 and architecturally styled chamber details Louvered design enhances smoke capture by directing Entrance areas are minimally visible when ceiling to chamber Chamber is easily accessible for cleaning Designed for EMI compatibility red LED with red lens indicates Power on when pulsing Alarm or Trouble when steady magnetic test feature that activates alarm a remote LED is not supported Refer to data sheet S4098 0019 for sensor bases that remote LED connections and additional analog detection features QuickConnect2 TrueAlarm Sensor in 4098 9788 Base applications that only require basic TrueAlarm the 4098 9757 QuickConnect2 sensor provides analog sensing in a cost effective compact The control panel monitors and maintains the sensitivity of the 4098 9757 as well as providing compensation for environmental conditions as dust dirt and component degradation and data capture for each sensor Mounting Wiring connections are to a 4098 9788 base which provides a secure and connection for the 4098 9757 sensor Sensor and electronics are contained in the sensor assembly Alarm and Trouble LED Indication The panel also determines when individual sensors cleaning Dirty sensors or other sensor troubles will be annunciated at the control panel and that LED will light steadily In an alarm condition alarmed sensor LED will light steadily LED is controlled by the panel During system alarm sensor LED that was lit to indicate trouble will return to to conserve communications power as long as it is in alarm This product has been approved by the California State Fire Marshal CSFM pursuant to 13144.1 of the California Health and Safety Code See CSFM Listing for allowable values and or conditions concerning material presented in document Accepted for use City of New York Department of Buildings MEA35 Additional listings may be applicable contact your local Simplex product supplier the latest status Listings and approvals under Simplex Time Recorder Co are the of Tyco Fire Protection Products 1 2015 Locations locations should be determined only after careful of the physical layout and contents of the to be protected Refer to NFPA 72 the National Fire and Signaling Code On smooth ceilings spacing 30 ft 9.1 m may be used as a guide detailed installation information refer to 574 709 Detectors Sensors and Bases Application Manual mounting base 4098 9788 installation instructions to 574 706 4098 Smoke Heat Base Installation QuickConnect2 Sensor Product Selection and Base QuickConnect2 TrueAlarm Sensor Mounting base for 4098 9757 4098 9788 base ordered separately one for each 4098 9757 sensor ordered separately Plate Plate for mounting to surface mounted boxes and 4 square flush boxes be used when retrofitting to existing bases Model number GSA4098 9757 complies with the Trade Agreement Act and appears in the GSA schedule Specifications and Communications Allocation Channel Capability Connections on 4098 9788 Base 4010 4007ES 4010ES 4100ES IDNet 2 or IDNet 2 2 or 4100ES 4100U 4100 3106 Module Velocity Range Listed Temperature Range Temperature Range Temperature Range Range communications auto selected 1 address per base address per sensor to 250 sensors devices per channel terminals for in out wiring and shield continuity connection to 14 AWG 0.82 to 2.08 mm2 selectable as 2.5 3.0 or 3.7 ft obscuration selectable from 0.2 to 3.7 ft obscuration standard sensitivities are 2.0 2.5 and 3.7 sensitivities of 0.2 0.5 and 1 are for applications in clean areas For detailed application information including sensitivity selection refer Installation Instructions 574 709 ft min 0 610 m min to 100 F 0 to 38 C to 122 F 0 to 50 C to 140 F 18 to 60 C to 95 RH from 32 to 122 F 0 to 50 C non condensing White to mounting illustrations on page 3 1 2015 Mounting Information Box Requirements octagonal or 4 square 1 1 2 deep gang 2 deep mount reference 102 mm box 102 mm box 38 mm box depth mount reference mount even with final or with up to 1 4 6.4 mm maximum recess mm Adapter Plate required for mounting surface mounted boxes and to 4 square flush mount boxes 162 mm Base QuickConnect2 sensor to address on back status indicator red lens Dimension Reference 124 mm mm height 17 mm 1 2015 SIMPLEX and the product names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm and Code are registered trademarks of the National Fire Protection Association NFPA Fire Protection Products Westminster MA 01441 0001 USA 1 2015 2015 Tyco Fire Protection Products All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice