Simplex UL Omni Medium Power Speaker Powered by HyperSpike® Acoustic Technology Audio Signaling & Notification Speaker

Omni Medium Power Speaker by HyperSpike Acoustic Technology Signaling Notification Speaker ULC CSFM Listed UL 1480 ULC S541 CSFM Listed Indoor or outdoor applications Installation via NPSM threaded coupler Electrical connections provided via wire lead 18 AWG through mounting coupler 70V drive 50W 100W 200W tap settings 129dB SPL 350Hz to 5kHz frequency range general signaling Output optimized for human voice Sharp warning tones Push to reset circuit breaker shown in red colors available Simplex 49OMNI powered by HyperSpike acoustic technology is intended for indoor and outdoor audio and notification The 70V tap settings have been tested with and are intended to be powered off standard fire panel amplifiers or other commercially available 70V amplifiers Its 360 degree omnidirectional acoustic makes it an ideal notification tool for large indoor and adjacent outdoor areas Its best in class acoustic coverage for fewer units to be installed in large indoor areas lowering installation and long term maintenance costs while improving intelligibility and esthetics Its best in industry voice quality and intelligibility combined with sharp and impact tone capability make it the right choice for ensuring that messages critical to personnel safety and security heard and understood Range at 80dB SPECIFICATION paging and tone signaling omnidirectional loudspeaker shall be a Simplex 49OMNI powered by HyperSpike technology or approved equivalent Unit input power shall be 70V RMS with 3 field selectable power taps 100W 200W with a blocking capacitor to allow for DC line supervision The unit shall comply with UL Standard ULC S541 UL Dry Damp and Wet NEMA3R and CSFM The omnidirectional loudspeaker shall be capable of 129 Peak dBA 1 meter with uniform SPL output at all 360 degree horizontal directions and a frequency of 500Hz 5000 Hz The speaker shall be a dual transducer device and measure 18.38 Diameter x 10.5 and weigh approximately 19 lbs An integrated NPSM threaded mounting coupler and safety cable D ring shall provided as well as 10 of electrical lead that exits through the threaded coupler 3 2018 SERVICES Survey and Design services are available by request by contacting Product Management SELECTION Model Input Description Size with red label with red label with no label with white label with white label with no label with red label with red label with no label DIA x 10 1 2 H DIA x 10 1 2 H DIA x 10 1 2 H DIA x 10 1 2 H DIA x 10 1 2 H DIA x 10 1 2 H DIA x 10 1 2 H DIA x 10 1 2 H DIA x 10 1 2 H Conduit NPSM Thread Conduit NPSM Thread Conduit NPSM Thread Conduit NPSM Thread Conduit NPSM Thread Conduit NPSM Thread Conduit NPSM Thread Conduit NPSM Thread Conduit NPSM Thread feet feet feet Model Input Size DIA x 10 1 2 H Pressure Level Losses 1480 Reverberation at 10 feet S541 Anechoic at 3 meters SPL RMS Broadband at 100 feet Range at 80dB OUTPUT RATINGS REFERENCE 3 2018 REFERENCE TCPA Omni has two 10 foot long 18AWG wires exiting through the mounting coupler on the top of the unit see 2 in Interface Reference These two wires are the positive red and negative black 70V drive input tap selection is accessible behind the cover plate on the top of the unit see Figure 3 in Interface Reference A torx driver is required to remove the panel The TCPA Omni ships with 50W tap selected 50W Wiring Diagram REFERENCE 100W Wiring Diagram 200W Wiring Diagram TCPA Omni is intended to be mounted suspended from the coupler on the top plate i e hanging from a ceiling the unit can be hung from a ridged mount hanging from a high bay hook or a swivel hanger will allow leveling The recommended operating height is greater than 12 feet Contact the manufacturer for acoustic To mount the TCPA Omni take the black and red wires coming out of the conduit and feed them through rigid conduit that is being used to mount the unit customer supplied Screw the rigid conduit onto the unit and tighten the top Phillips head screw as shown below item A D ring has been provided to secure a safety cable to the TCPA Omni The safety cable is a customer MA 01441 0001 USA 3 2018 2018 Johnson Controls All rights reserved All specifications and other information shown were current as of document revision date and are subject to change without notice