Simplex Unattended Operating

S implex Multiplex Unattended action will be performed at the operator panel shown below PRIORITY t ALARM ZALARM POINTS ON POINTS ACTIVATED PANEL NORMAL CONDITION ALL CLEAR indicator Time date displayed 3 condition not illuminated OR TROUBLE CONDITION TONE sounds Appropriate condition ALL CLEAR indicator not illuminated illuminated blinking To Do 1 Depress ACKNOWLEDGE pushbutton adjacent to indicator Type of ALARM and point number is displayed Record this information 2 Depress LOCATION INFORMATION pushbutton Location of condition will be displayed Record this information 1986 Simplex Time Recorder Co Gardner Mass 01441 0001 U S A 3 Take appropriate action tone continues sounding additional conditions exist Repeat steps 1 2 and 3 remains on steady when all alarms are ACKNOWLEDGED 4 Audible alarm s may be silenced by depressing SIGNAL SILENCE pushbutton OR TROUBLE CONDITION RETURNED TO NORMAL Tone sounds Appropriate condition starts blinking To Do 1 Depress ACKNOWLEDGE pushbutton adjacent to indicator Alarm acknowledged will be displayed 2 If audible alarms are sounding depress SIGNAL SILENCE pushbutton 3 Depress DETECTOR RESET pushbutton Conditions should be back to standby If not repeat step 1 will be printed on the local printer operating are contained the Operating Instruction Manual for the 2120 Multiplex case of trouble or a malfunction call the local Simplex Local Service Representative Call NO INSTRUCTIONS must be mounted adjacent to the Control Unit